Multi-Jib  Pro-Jib & Libec Jib
from HAGUE and LIBEC

Buy online from www.cameragrip.co.uk

HAGUE K12

MULTI-JIB


Picture shows Multi-Jib at standard length on
 Manfrotto 351 legs & Hague D4 dolly.

* Choice of three jib lengths 

* Quick and simple to set up

* Radial ball bearings ensure
   super smooth crane movement

* Fits to a Pro 100/75mm "bowl type" Tripod 
   or a Hague Dolly. 

* The camcorder can move smoothly from ground level
   to almost 4 metres high & pans 360 degrees.

Multi-Jib
K12
  
Buy online from  www.cameragrip.co.uk  

Suitable for all Camcorders!

The Multi-Jib
fastens to any pro-tripod with a 100 or 75mm. bowl or a Hague dolly. It is quick and simple to set up and can be used at three different lengths. At it's standard or short length it will support up to 14kg. and at it's longest length will support up to 9kg.. A 100mm. bowl enables you to fasten your video head from your tripod onto the jib, (an optional Stepper Ring is available if you are on the 75mm. bowl system) or a pan & tilt power head can be used for remote operation. Radial ball bearings ensure super smooth crane movement from ground level to almost 4 metres high and pan 360 degrees. Drag can be added to hold the arm at a set position. Standard bar weights can be used as counterbalance or we can supply weights or sand bags as optional extras.

 

Picture shows Multi-Jib at its longest length
on Manfrotto 351 legs & Hague D4 dolly.

The Multi-Jib breaks down to just 1.2 metres in length making it very easy to handle and will fit in any vehicle. It is suitable for all handheld camcorders, pro-camcorders and will support a maximum weight of 14kg.
An optional video head , or remote pan & tilt power head can be fitted to the jib, a LCD monitor bracket is also available making it easier to monitor your shots.

Supplied in a cardboard carton.
Price excludes - tripod, dolly, video head, power head, camera, weights and bag

Picture shows Multi-Jib at it's shortest length
on Manfrotto 525legs & Hague D4 dolly.
 

Picture shows optional Underslung
Pan & Tilt Power Head

The table below shows the various configurations the jib can be used in.

LENGTH MODE PAN
RADIUS
TOTAL
LENGTH
CRANE
MOVEMENT
MAXIMUM
WEIGHT
SHORT B 112cm / 44" 186cm / 73" 130cm / 51" 14kg.
SHORT C 107cm / 42" 186cm / 73" 120cm / 47" 14kg.
STANDARD B 175cm / 69" 285cm / 112" 254cm / 100" 12kg.
STANDARD A 152cm / 60" 285cm / 112" 196cm / 77" 14kg.
LONG A 262cm / 103" 396cm / 155" 396cm / 155" 9kg.
LENGTH - Short is using a single section of the jib. Standard is using two sections and Long is using all three sections.
MODE - There are three pivot positions the jib can be assembled in.  
PAN RADIUS - This is the distance from the tripod to camera when the jib is in a horizontal position.
TOTAL LENGTH - This is the length from the weights to  camera when the jib is in a horizontal position.
CRANE MOVEMENT - This is the maximum up & down movement, from its lowest position to its highest.
MAXIMUM WEIGHT - This is the maximum combined weight of camera and video head the jib will support.


 

Carton Size 130cm x 20cm x 20cm. - Weight 18kg. 
Fastens to a 100 or75mm "Bowl Type" tripod or the following Hague Dollies D1, D2 or D7.

Pro-Bag (BLACK) 130cm x 20cm x 20cm

CODE PRODUCT PRICE
exc.vat
PRICE
inc.vat
K12 Multi-Jib as described above    
SWB Two Sand bags for counterbalance (sand not supplied)    
SBW 20kg. of Counterbalance Weights (extra ones may be needed for heavier cameras)    
K12PTB Pro Padded Transit Bag for Multi-Jib with space for accessories    
K12SB Soft Padded Transit Bag for Multi-Jib    
SR Stepper Ring - Steps down from 100 to 75mm. to accept a head with a 75mm. half ball.    
MB/A LCD Monitor Bracket for monitors with 1/4 mount in the base    
PH Remote Pan & Tilt Power Head. ( more details )    
UPH Remote Underslung Pan & Tilt Power Head. ( more details )    
D4/351 Manfrotto 351 tripod legs (NO HEAD) with Hague D4 dolly. Ideal to support the Muti-Jib K12    
D1 Hague Column Dolly for Multi-Jib ( more details )    

 

Hague - K14

 PRO - JIB

*  A traditional boom 

Supports up to 14kg. 

*  Telescopic counterbalance arm 

*  Effortlessly smooth crane movement

*  Fits to a Pro 100/75mm "bowl type" Tripod 
    or a Hague Dolly

   HAGUE PRO - JIB 
      K14
  
Buy online from  www.cameragrip.co.uk  

The Hague Pro-Jib has been designed for use with heavier cameras, to support a maximum weight of 14 kilos. The telescopic counterbalancing arm uses standard bar weights for counterbalance (not supplied). All axis points have radial ball bearings giving an effortlessly smooth vertical crane movement of 2 metres. The Jib is supplied with a 100mm "Bowl type" camera plate which enables you to use your own video head, a 100 to 75mm stepper ring is also  supplied should you have a 75mm video head. The Pro-Jib can be used on any 100/75mm "Bowl type" tripod or a Hague Dolly D1/2/7

Supplied in a cardboard carton.
Price excludes - tripod, video head, camera and weights.

Supports up to 14kg. - Vertical crane movement 2m. - Pan radius 140cm.(distance from tripod to camera) - Weight  8kg. - Transit size 150cm x 23cm x 20cm.
Price includes:- Jib Arm with 100mm "Bowl Type" Camera Plate & a 100 to 75mm stepper ring, which enables a video head with a 75mm half ball to be used on the jib. Standard bar weights are required for counterbalance. Can be used on a 100 or 75mm "Bowl Type" Pro–tripod. The Jib also fits directly onto the Hague Dollies D1, D2, or D7.

CODE PRODUCT PRICE
exc.vat
PRICE
inc.vat
K14 Pro-Jib as described above    
SBW 15kg. of Counterbalance Weights    
D5B Padded Transit Bag for Pro-Jib with space for accessories. Size 19 x 22 x 162cm.    
SBAG Soft padded transit bag with carrying straps    
MB/A LCD Monitor Bracket for monitors with 1/4 mount in the base    
D4/351 Manfrotto 351 tripod legs (NO HEAD) with Hague D4 dolly. Ideal to support the Pro-Jib K14    
D1 Hague Column Dolly for Pro-Jib ( more details )    

 

Libec JB-30U

JIB



Libec JB-30U Jib Arm with Weights  
Our price
Buy online from  www.cameragrip.co.uk  


Quick
and easy set up.
Light weight mobile.
Camera mounting bowl accepts either 100mm or 75mm diameter heads.
Features a 100 mm claw ball for any tripods applicable.


Supports up to 20kg.

Easy reverse bowl for extremely low camera angles.
Easily adjusting main arm.

 


Light weight and portable.

Jib Kit includes
:- Padded carry case, Jib arm, 75mm adaptor, Adjusting weight 1 kg., Under mount,
Weight Kit
includes:- 2 x 2.5kg., 2 x 5kg. rubber covered weights,
Carrying case.

TRIPOD & DOLLY
NOT INCLUDED

 

 

RETURN TO MAIN MENU

 

HOW TO ORDER


Phone Ha
gue Distribution on  +44 (0)115 9599028
or buy online from www.cameragrip.co.uk 
 

  

 B. Hague & Co. Ltd.
 Unit E2 Trent Park Trading Estate
 Little Tennis Street South
 Nottingham
 NG2 4EU

 Phone:  +44 (0)115 959 9028    
 E-mail: 
info@b-hague.co.uk

 
Hours of business

 Monday - Friday 8.00am. - 5.00pm.

 All our products are on display in our showroom.
 ( Viewing by appointment only - no children )
 Demonstrations -
A chance to see and try before you buy!
 

 

RETURN TO MAIN MENU