RODE NTG-2 MICROPHONE

 

RODE SHOTGUN MICROPHONE
 Product code NTG-2
Product code NTG-2 Our price £135.32 exc.vat  £159.00 inc.vat SAVE £30.00 
plus £7.95 UK Delivery

Dual Powered Directional Condenser Microphone.

The new RODE NTG-2 is a lightweight condenser shotgun microphone, designed for professional applications within the film, video, television and production industries.
The NTG-2 provides a balanced low impedance output stage and operates either from an internal 1.5 V battery (AA) or 48 V to the P48 standard. A wide bandwidth and controlled polar response coupled with low noise SMT electronics, makes the NTG-2 the perfect choice for film, video engineering and voice-over work. The NTG-2 is extremely lightweight making it ideal for mounting directly to video cameras or on boom poles.
The NTG-2 comes complete with mount and windshield. The windscreen effectively suppresses wind noise when recording outdoors in moderate conditions.
Power - The NTG-2 is designed to operate from standard P48 phantom power or a 1.5 V Alkaline Battery, it operates between 44 V to 52 V applied with positive polarity to pin 2 and pin 3 via the output XLR connector.
Weight - 161g. Size - 278 x 22mm. 
 

PLEASE NOTE the NTG-2 is not supplied with an XLR cable. See below

 

 

  MICROPHONE ACCESSORIES  
XLR Microphone cable x 6m. long
Product code RXLR-1 £12.72 exc.vat  £14.95 inc.vat. 
plus £2.95 UK Postage
6 metre long - XLRF to XLRM microphone (Black) cable for Rode NTG-1, NTG-2

Short XLR Microphone cable x 500mm. long
Product code RXLR-2 £15.28 exc.vat  £17.95 inc.vat. 
plus £2.95 UK Postage
A short cable for camcorder mounting - XLRF to XLRM microphone (Black) cable for Rode NTG-1, NTG-2

 
Microphone cable XLR to 3.5 Stereo Plug  x 6m. long
Product code RXLR-3 £12.72 exc.vat  £14.95 inc.vat. 
plus £2.95 UK Postage
5 metre long - XLRF to 3.5 stereo jack.   Microphone cable for Rode NTG-2
Enables the Rode NTG2 or similar to be used on a camcorder with a 3.5mm stereo jack socket.

Microphone cable XLR to 3.5 Stereo Plug  x 2m. long
Product code RXLR-4 £11.02 exc.vat  £12.95 inc.vat. 
plus £2.95 UK Postage
2 metre long - XLRF to 3.5 stereo jack.   Microphone cable for Rode NTG-2
Enables the Rode NTG2 or similar to be used on a camcorder with a 3.5mm stereo jack socket.

RODE DEAD CAT
Product code VMDC £22.09 exc.vat  £25.95 inc.vat. 
plus £2.95 UK Postage
High wind cover, suitable for Rode's Videomic, NTG-1, NTG-2 and Hama RMZ

RODE DELUXE WINDSHIELD WS6
Product code WS6  £34.00 exc.vat  £39.95 inc.vat. 
plus £2.95 UK Postage

The RØDE WS6 Deluxe Windshield is designed to reduce wind noise when recording in adverse environmental conditions.
Suitable for the RØDE NTG-1 and NTG-2, as well as any shotgun microphone with a maximum slot length of 160.5mm (6 1/4”) and a diameter of 21-22.5mm.

MORE DETAILS

RODE PG2 PISTOL GRIP SHOCK MOUNT 
Product code PG2   £41.66 exc.vat. £48.95 inc.vat. 
plus £2.95 UK Postage

The RØDE PG2 Pistol Grip Shock Mount is designed to reduce handling noise when recording with shotgun microphones.
It supports microphones with a diameter of 19-20mm or 21-22.5mm using the supplied interchangeable mounts, and a handy release lever on the mount allows for quick and easy adjustment of the microphone angle.

MORE DETAILS

RODE BLIMP WINDSHIELD and PISTOL GRIP
Product code BLIMP   £144.64 exc.vat. £169.95 inc.vat. 
plus £7.95 UK Delivery

Complete windshield and pistol grip system for NTG series shotgun mics and all other mikes of shotgun mics up to 425mm in length.

MORE DETAILS

RODE SUSPENSION MOUNT
Product code NTSM4 £26.34 exc.vat  £30.95 inc.vat. 
plus £2.95 UK Postage
 NTSM4 Suspension Shock Mount - (Stand Adaptor)
A shotgun microphone suspension shock mount with a stand mount adaptor. The NTSM4 shock mount is designed to significantly reduce vibration transmission to shotgun microphones.
Features a 4-way rubber suspension with friction tilt mechanism to aid directional positioning. A three way mounting system with 1/4” x 20 and 3/8” x 16 internal threads, a 5/8” x 27 and a 3/8” to 5/8” thread adaptor for Tripod, Boom Pole and mic stand mounting.
Also, the perfect accessory for Rode NTG1, NTG2 and Hama RMZ10, RMV02


Picture shows Suspension Mount (NTSM4) on Boom Pole (RBP)

RODE SUSPENSION SHOE MOUNT
Product code NTSM3 £26.34 exc.vat  £30.95 inc.vat. 
plus £2.95 UK Postage
 NTSM3 Suspension Shock Mount - (Cold Shoe Adaptor)
The NTSM3 is a shock mount designed to significantly reduce vibration transmission to all shotgun microphones. Perfect for the RØDE NTG series. Features a 4-way rubber suspension system with quick release tilt mechanism to aid directional positioning and avoid visual intrusion.
A three way mounting system with 1/4”x 20 and 3/8" 16 internal threads for Boom Pole or Tripod mounting and a standard hot shoe adaptor for direct camera mounting.
Also, the perfect accessory for Rode NTG1, NTG2 and Hama RMZ10, RMV02

RODE SUSPENSION SONY/PANASONIC MOUNT
Product code NTSM5 £31.45 exc.vat  £36.95 inc.vat. 
plus £2.95 UK Postage
 NTSM5 Suspension Shock Mount - (Clamp Adaptor)
A shotgun microphone suspension shock mount for high end video cameras. The SM5 shock mount is designed specifically to fit Panasonic® and Sony® video cameras with clamp mounts. Features a 4-way rubber suspension with an integral Ø24 mm and Ø27 mm clamp mount adaptor.
The SM5 incorporates a two way mounting system with 1/4"x 20 and 3/8" x 16 internal threads, for Tripod and Boom Pole mounting.

ANTI-VIBRATION MICROPHONE HOLDER
Product code AVM   £14.43 exc.vat. £16.95 inc.vat. 
plus £2.95 UK Postage

Reduces camera and handling noise as the microphone is suspended in a rubber mount. Adjustable tilt, suitable for microphones with a 25-30mm. body diameter. Standard 5/8"thread, plus two adaptors 1/4" to 3/8" and 3/8" to 5/8"

CLIP-TYPE MICROPHONE HOLDER
Product code CTM   £5.95 exc.vat. £6.99 inc.vat. 
plus £2.95 UK Postage

This adjustable clip-type microphone holder is suitable for holding most types of microphones.
Standard 5/8"thread, plus two adaptors 1/4" to 3/8" and 3/8" to 5/8"

MICROPHONE HANDGRIP
Product code MH   £16.98 exc.vat. £19.95 inc.vat. 
plus £2.95 UK Postage

The Handgrip is ideal for handheld microphone use, it has a 1/4" stud with adaptors for stepping to 3/8" and 5/8" plus a shoe adaptor for microphones which would normally be attached to the camcorder's accessory shoe.
Pictures - Left shows Microphone Handgrip with adaptors. Right shows with an optional microphone attached.

DOUBLE SHOE BRACKET
 Product code DSB £21.23 exc.vat £24.95 inc.vat
 plus £2.95 UK Postage

Fits to the accessory shoe of the camcorder, enables a microphone and light to be attached to the camera.
Choice of three mounting holes. Size:- 150 x 25 x 10mm.

SHOE ACCESSORY KIT
Product code SAK   £16.13 exc.vat. £18.95 inc.vat. 
plus £2.95 UK Postage

The kit includes a shoe clamp with 2 locking nuts, a mini ball head, a 1/4" to 3/8" adaptor, a 3/8" to 5/8" microphone adaptor.
HAGUE SHOE ADAPTOR for Canon HF100/10
Product Code CSA   £17.83 exc.vat. £20.95 inc.vat. 
plus £2.95 UK Postage
Only suitable for Canon HF100 and HF10 plus other new Canon camcorders with a small accessory shoe
The HF100/10, along with some other new Canon camcorders, do not have a standard size accessory shoe so you are unable to attach other manufacturers microphones, lights etc. The Shoe Adaptor converts the small shoe on the camcorder to a standard sized one. It is raised by 20mm to clear the zoom control on some models making it easy to attach microphones, lights etc.

 

 

 

 

 

 

 

 SINGLE SHOE ADAPTOR
Product Code SSA   £17.83 exc.vat. £20.95 inc.vat. 
plus £2.95 UK Postage
Only suitable for Sony camcorders with a small shoe and a 3.5mm mic input.
Ideal for Sony HC1/7
The HC1/7, along with some other Sony camcorders, does not have a standard size accessory shoe so you are unable to attach other manufacturers microphones, lights etc. The Single Shoe Adaptor converts the shoe on the camcorder to a standard sized one. It is raised by 20mm to clear the  shoe cap making it easy to attach microphones, lights etc.
 (Picture shows Rode VideoMic attached to the HC1 using the Single Shoe Adaptor)

DOUBLE SHOE ADAPTOR
Product Code DSA   £22.94 exc.vat. £26.95 inc.vat. 
plus £2.95 UK Postage
Only suitable for Sony camcorders with a small shoe and a 3.5mm mic input.
Ideal for Sony HC1/7
The Double Shoe Adaptor converts the small Sony camera shoe (HC1/7) to a twin standard size shoe, enabling two accessories to be mounted at the same time. ie microphone and light.
(Picture shows Rode VideoMic and a video light attached to the HC1 using the Double Shoe Adaptor)

  

 

RETURN TO MICROPHONES

 

RETURN TO MAIN MENU

Buy online from www.cameragrip.co.uk

HOW TO ORDER


You can purchase the majority of our products online from www.cameragrip.co.uk
We do not have an on-line ordering service on this site.. 
Orders can be made by phone on  +44 (0)115 987 0031 
or by Fax on +44 (0)115 987 2900 
or by e-mail  sales@b-hague.co.uk 
or by post to B. Hague & Co. Ltd. Mile End Road, Colwick, Nottingham, England. NG4. 2DW 

TO ORDER We will require your name and address, name of product and product code.
If payment is by credit card, we will need name and address of card holder, card number, expiry date & security code ( this is the last set of numbers/digits on the other side of the card next to the signature ) plus issue number on switch cards. Orders by credit card can only be dispatched to the card holder's address.

PAYMENT - We accept VISA,  MASTERCARD, DELTA, SWITCH & CONNECT CARDS, or CHEQUES in Sterling. ( WE DO NOT ACCEPT AMERICAN EXPRESS )
CARRIAGE COSTS in the UK – See above (UK Only).  

US DOLLARS and EUROS
To calculate the approximate cost in $ US DOLLARS multiply the exc.vat price by 1.90
To calculate the approximate cost in € EUROS multiply the inc.vat price by 1.40
This is only a guide, all transactions are in Pounds Sterling
SHIPPING COSTS to Europe & the rest of the world available on request.  

  

 B. Hague & Co. Ltd.
 Mile End Road, Colwick, 
 Nottingham. NG4 2DW

 Phone:  +44 (0)115 987 0031    
 Fax:  +44 (0)115 987 2900    
 E-mail:  info@b-hague.co.uk

  
 Hours of business

 Monday - Thursday 8.00am. - 5.00pm.
 Friday 8.00am. - 1.00pm.

 All our products are on display in our showroom. 
 ( Viewing by appointment )
 Demonstrations - A chance to see and try before you buy!
  

November 2008

RETURN TO MAIN MENU