RODE NTG-3 MICROPHONE

 

RODE BROADCAST SHOTGUN MICROPHONE
 Product code NTG-3 Our price  £387.19 exc.vat  £454.95 inc.vat

Precision broadcast-grade shotgun microphone

The NTG-3 is the result of years of development by RØDE engineers, providing the professional broadcast and film industries with an affordable yet uncompromising microphone.
Using a technology known as RF-bias the RØDE NTG-3 is almost completely resistant to moisture, making it the only option when recording in any demanding environments where condensation is an issue.
In addition to its robust properties the NTG-3 combines very low weight (163g), a durable anti-glare finish and incredibly low handling and self-noise (13dBA) to become RØDE’s premier A/V microphone.
When not in use the NTG-3 can be stored away in the included weather resistant aluminium storage cylinder, providing additional protection when travelling and storing the microphone.

  • Designed to withstand adverse environmental conditions

  • 50% less self-noise than the majority of shotgun microphones

  • True condenser (externally RF biased)

  • Extremely low handling noise

  • High level of immunity to radio frequency broadcast

  • Superior broadcast sound quality

  • Weather resistant aluminium storage cylinder included

 

Power

P48 (48V) phantom supply

Acoustic Principle

Line Gradient

Directional Pattern

Super Cardioid
Frequency range 40 Hz - 20 kHz
Output impedance 25Ω
Signal noise ratio 81 dB SPL (A - weighted per IEC651)
Equivalent noise 13 dB SPL (A - weighted per IEC651)
Maximum SPL 130dB SPL (@ 1kHz, 1% THD into 1KΩ load)
Maximum output voltage 8.2dBu (@ 1kHz, 1% THD into 1KΩ load)
Sensitivity -30 dB re 1 Volt/Pascal (31.6 mV @ 94 dB SPL) +/- 2 dB @ 1kHz
Weight 163gm
Dimensions 255mmH x 19mmW x 19mmD

 

 

  MICROPHONE ACCESSORIES  
XLR Microphone cable x 6m. long
Product code RXLR-1
6 metre long - XLRF to XLRM microphone (Black) cable for Rode NTG-1, NTG-2

Short XLR Microphone cable x 500mm. long
Product code RXLR-2
A short cable for camcorder mounting - XLRF to XLRM microphone (Black) cable for Rode NTG-1, NTG-2

 
RODE DEAD CAT
Product code VMDC
High wind cover, suitable for Rode's Videomic, NTG-1, NTG-2 and Hama RMZ

RODE DELUXE WINDSHIELD WS7
Product code WS7 

The RØDE WS7 Large Deluxe Windshield is designed to reduce wind noise when recording in adverse environmental conditions.
Suitable for the RØDE NTG-3 as well as any shotgun microphone with a maximum slot length of 186.5mm (7 1/4”) and a diameter of 19-20mm.

MORE DETAILS

RODE PG2 PISTOL GRIP SHOCK MOUNT 
Product code PG2  

The RØDE PG2 Pistol Grip Shock Mount is designed to reduce handling noise when recording with shotgun microphones.
It supports microphones with a diameter of 19-20mm or 21-22.5mm using the supplied interchangeable mounts, and a handy release lever on the mount allows for quick and easy adjustment of the microphone angle.

MORE DETAILS

RODE BLIMP WINDSHIELD and PISTOL GRIP
Product code BLIMP  

Complete windshield and pistol grip system for NTG series shotgun mics and all other mikes of shotgun mics up to 425mm in length.

MORE DETAILS

RODE SUSPENSION MOUNT
Product code NTSM4
NTSM4 Suspension Shock Mount - (Stand Adaptor)
A shotgun microphone suspension shock mount with a stand mount adaptor. The NTSM4 shock mount is designed to significantly reduce vibration transmission to shotgun microphones.
Features a 4-way rubber suspension with friction tilt mechanism to aid directional positioning. A three way mounting system with 1/4” x 20 and 3/8” x 16 internal threads, a 5/8” x 27 and a 3/8” to 5/8” thread adaptor for Tripod, Boom Pole and mic stand mounting.
Also, the perfect accessory for Rode NTG1, NTG2 and Hama RMZ10, RMV02


Picture shows Suspension Mount (NTSM4) on Boom Pole (RBP)

RODE SUSPENSION SHOE MOUNT
Product code NTSM3
NTSM3 Suspension Shock Mount - (Cold Shoe Adaptor)
The NTSM3 is a shock mount designed to significantly reduce vibration transmission to all shotgun microphones. Perfect for the RØDE NTG series. Features a 4-way rubber suspension system with quick release tilt mechanism to aid directional positioning and avoid visual intrusion.
A three way mounting system with 1/4”x 20 and 3/8" 16 internal threads for Boom Pole or Tripod mounting and a standard hot shoe adaptor for direct camera mounting.
Also, the perfect accessory for Rode NTG1, NTG2 and Hama RMZ10, RMV02

RODE SUSPENSION SONY/PANASONIC MOUNT
Product code NTSM5
NTSM5 Suspension Shock Mount - (Clamp Adaptor)
A shotgun microphone suspension shock mount for high end video cameras. The SM5 shock mount is designed specifically to fit Panasonic® and Sony® video cameras with clamp mounts. Features a 4-way rubber suspension with an integral Ø24 mm and Ø27 mm clamp mount adaptor.
The SM5 incorporates a two way mounting system with 1/4"x 20 and 3/8" x 16 internal threads, for Tripod and Boom Pole mounting.

MICROPHONE HANDGRIP
Product code MH  

The Handgrip is ideal for handheld microphone use, it has a 1/4" stud with adaptors for stepping to 3/8" and 5/8" plus a shoe adaptor for microphones which would normally be attached to the camcorder's accessory shoe.
Pictures - Left shows Microphone Handgrip with adaptors. Right shows with an optional microphone attached.

DOUBLE SHOE BRACKET
 Product code DSB

Fits to the accessory shoe of the camcorder, enables a microphone and light to be attached to the camera.
Choice of three mounting holes. Size:- 150 x 25 x 10mm.

 

RETURN TO BOOM POLES & MICROPHONES

RETURN TO MAIN MENU

 

HOW TO ORDER

You can purchase online from www.cameragrip.co.uk 
We do not have an on-line ordering service on this site.. 
Orders can be made by phone on  +44 (0)115 987 0031 
or by Fax on +44 (0)115 987 2900 
or by e-mail  sales@b-hague.co.uk 
or by post to B. Hague & Co. Ltd. Mile End Road, Colwick, Nottingham, England. NG4. 2DW 


TO ORDER We will require your name and address, name of product and product code.
If payment is by credit card, we will need name and address of card holder, card number, expiry date & security code ( this is the last set of numbers/digits on the other side of the card next to the signature ) plus issue number on switch cards. Orders by credit card can only be dispatched to the card holder's address.

PAYMENT - We accept VISA,  MASTERCARD, DELTA, SWITCH & CONNECT CARDS, or CHEQUES in Sterling. ( WE DO NOT ACCEPT AMERICAN EXPRESS )
CARRIAGE COSTS in the UK – £12.95, £7.95 or £2.95 Depending on size, weight or value. 

SHIPPING COSTS to Europe & the rest of the world will automatically be calculated if purchased online from  www.cameragrip.co.uk 
or e-mail sales@b-hague.co.uk  for a quotation.

 

  

 B. Hague & Co. Ltd.
 Mile End Road, Colwick, 
 Nottingham. NG4 2DW

 Phone:  +44 (0)115 987 0031    
 Fax:  +44 (0)115 987 2900    
 E-mail:  info@b-hague.co.uk

  
 Hours of business

 Monday - Thursday 8.00am. - 5.00pm.
 Friday 8.00am. - 1.00pm.

 All our products are on display in our showroom. 
 ( Viewing by appointment only )
 Demonstrations - A chance to see and try before you buy!
  

January 2010

  

RETURN TO MAIN MENU