Sony_A1_HC1_accessories

Special accessories for the Sony HVR-A1 & HDR-HC1/7
Tripod Adaptor - Accessory Shoe Adaptor - Camframe
Wideangle Lens - High Capacity Battery - etc.

You can now buy the majority of our products online from www.cameragrip.co.uk

	Listening to the comments from people who have purchased the A1 & HC1/7, we have developed and produced the following products which we hope you may find useful. We have also listed other accessories for owners of these camcorders.

	TRIPOD ADAPTOR Product Code TA *Buy online from www.cameragrip.co.uk* plus £2.50 UK Postage Ideal for Sony A1/HC1 On the A1 and the HC1 the tape is loaded in the base of the camcorder, making it awkward to change the tape if the camera is used on a tripod. The Tripod Adaptor fits between the camcorder and the camera release plate raising it by 50mm, which leaves enough room for the tape to be replaced without removing the camcorder, or the release plate from the tripod. This enables the operator to quickly change tape whilst the camcorder remains on the tripod. N.B. For the adaptor to work it only fastens half way across the base of the camcorder, and as the plastic casing of these camcorders is very thin, the camcorder is not as rigid as it would be when mounted directly to a large release plate.	Tripod Adaptor Size:- L50mm x H50mm x W30mm.

SINGLE SHOE ADAPTOR
Product Code SSA Buy online from www.cameragrip.co.uk

Only suitable for Sony camcorders with a small shoe and a 3.5mm mic input.
Ideal for Sony HC1/7
The HC1/7, along with some other Sony camcorders, does not have a standard size accessory shoe so you are unable to attach other manufacturers microphones, lights etc. The Single Shoe Adaptor converts the shoe on the camcorder to a standard sized one. It is raised by 20mm to clear the shoe cap making it easy to attach microphones, lights etc.
(Picture shows Rode VideoMic attached to the HC1 using the Single Shoe Adaptor)

DOUBLE SHOE ADAPTOR
Product Code DSA Buy online from www.cameragrip.co.uk
Only suitable for Sony camcorders with a small shoe and a 3.5mm mic input.
Ideal for Sony HC1/7
The Double Shoe Adaptor converts the small Sony camera shoe (HC1/7) to a twin standard size shoe, enabling two accessories to be mounted at the same time. ie microphone and light.
(Picture shows Rode VideoMic and a video light attached to the HC1 using the Double Shoe Adaptor)


	HAGUE CAMCORDER STABILIZER Product Code HCS *Buy online from www.cameragrip.co.uk* Ideal for Sony A1/HC1/3/5/7 * Quick & simple to set up * Smooth camera movement * Eliminates camera shake * Fine trim on both axes * Quick release camera plate This handheld camcorder stabilizing system works in a similar to a steadycam and it is ideal for the Sony A1 & HC1/3/5/7. Its simple design has brought the cost of a stabilizing unit down to a price you can afford, yet it is still as effective as other stabilizers currently on the market. A unique adjustable pivot cup, with fine trim, enables you to smoothly control the direction of the camera. Other features include a quick release camera plate with a greater trim movement to allow for a wide angle lens or larger batteries to be attached to the camcorder. A selection of counterbalance weights are supplied for balancing the different weights of camcorder.

Picture shows HC1, Videomic, Light & Manfrotto Remote attached to the Camframe	CAMFRAME Product Code CF *Buy online from www.cameragrip.co.uk* Ideal for Sony A1/HC1/7 Extra stability is achieved as the camcorder is held by both hands. How does it work? The camcorder mounts onto the base of the frame, slightly to the right to enable the flip-out screen to be used to monitor your shots. Also on the base of the frame is a mounting point for a tripod quick release plate, as well as a mounting point for a monopod. To the right and left are handgrips to hold the Camframe. It is the combination of your left and right hand 30cm apart, plus your arms in front of you, that give the camera a stabilizing effect. Just above the right and left handgrips is space for a clamp-on camcorder remote control, ideal if you are using a Sony or Canon camcorder that has a lanc socket (more details). At the top of the frame there is another handgrip for carrying the Camframe or it can be used when taking low shots. Either side of this handgrip are accessory shoes onto which you can add an external light or microphone.	Price excludes all accessories shown. Size:- W30cm x H20cm x D3cm.

	CAMCORDER STEADYMOUNT 2 Product Code CS2 *Buy online from www.cameragrip.co.uk* Ideal for Sony A1 The Camcorder Steadymount 2 makes it much easier to keep the camcorder stable as it is held by both hands. It has mounting holes to attach it to a tripod's release plate, making it quick and simple to change from handheld to tripod mounted. It's ideal for the A1 and all types of handheld Camcorders up to 3kg. Weight:- 150g. Length:- 180mm. approx.

	CAMCORDER STEADYMOUNT 1 Product Code *CS1 Buy online from www.cameragrip.co.uk* Ideal for Sony HC1/7 The Camcorder Steadymount makes it much easier to keep the camcorder stable as it is held by both hands. It simply screws into the tripod mount underneath the camera. The mount's design allows room for the camera's flip out screen to be used and there are two accessory shoes for attaching a microphone or video light. It also has mounting holes to attach it to a tripod's release plate, making it quick and simple to change from handheld to tripod mounted. It's ideal for the HC1 and A1, plus all Mini DV handheld Camcorders up to 3kg. Weight:- 180g. Length:- 260mm. approx.

	CAMCORDER STEADYMOUNT 4 Product Code CS4 *Buy online from www.cameragrip.co.uk* Ideal for Sony HC1/7 The Camcorder Steadymount 4 makes it much easier to keep the camcorder stable as it is held by both hands. The folding "L" shaped bracket with strap has a slotted camera platform for adjustment. The mount's design allows room for the camera's flip out screen to be used and there is an accessory shoe for attaching a microphone or video light. It's ideal for the HC1, plus all small Mini DV handheld Camcorders up to 1kg. Weight:- 130g. Size folded:- 165 x 35 x 45mm. approx.

	SHOE BRACKET *Product Code 6812* *Buy online from www.cameragrip.co.uk* Ideal for Sony HC1/7 Because the HC1 does not have a standard accessory shoe you are unable to mount other manufacturers lights, microphones, etc. The Shoe Bracket simply screws into the base of the camcorder and is adjustable sideways. There is also a 1/4" thread in the thumb screw so a tripod camera plate can also be attached. Made of metal with plastic platform. Size 30 x 180 mm.

	LOWEPRO NOVA 5AW CAMCORDER BAG Product Code NOVA5 *Buy online from www.cameragrip.co.uk* IDEAL FOR SONY HVR-A1 This lightweight, feature-packed shoulder bag has our famous All Weather Cover™ and OverLap Zipper™ to resist bad weather and dust; a pressed-foam shoulder strap for superior comfort. Customizable interior; mesh side pockets, an inner mesh pocket, back security pocket and organizer pockets hold accessories. Size (Interior): 14W x 6D x 8.5H in. / 35.5 x 15 x 21.5 cm Outer fabric: water-resistant 600D TXP™ and 600D TXP™ ripstop

	LOWEPRO NOVA 4AW CAMCORDER BAG Product Code NOVA4 *Buy online from www.cameragrip.co.uk* IDEAL FOR SONY HDR-HC1/5/7 The perfect travel bag includes our invaluable All Weather Cover™ and OverLap Zipper™ to guard your gear from rain, snow, dust and sand. Adjustable, padded dividers customize the interior; the NoDrop Pocket™ offers greater security while in use. Includes a curved, pressed-foam shoulder strap; padded handle; belt loops; tough metal hardware; inner and outer mesh pockets; and back security pocket. Size (Interior): 11.5W x 6D x 7.75H in. / 29 x 15 x 19.5 cm Outer fabric: water-resistant 600D TXP™ and 600D TXP™ ripstop

Picture shows Rode VideoMic attached to the HC1 using the Single Shoe Adaptor	RODE VideoMic Product code VM *Buy online from www.cameragrip.co.uk* Ideal for Sony HC1/7 (Please note you will need one of the above shoe adaptors) The RØDE VideoMic is a professional grade shotgun microphone. Based on the latest ‘Film industry’ technology, the VideoMic is designed specifically for use with high quality Digital Video Cameras. VideoMic is a lightweight highly directional condenser microphone, especially designed for video cameras. Handling noise is reduced via use of a rubber suspension mount and the mic's rigid outer construction. A foam windscreen effectively suppresses wind noise when recording outdoors. VideoMic is powered from a 9V battery (lasts approx 100 hrs.) and connects to camera by Stereo 3.5mm Mini Jack. Weight 176grm. Size L250 x W65 x H102mm.

	SWIT Battery for Sony A1 & HC1 *Product Code S-8M91* *Buy online from www.cameragrip.co.uk* S-8M91 Li-Ion 7.2v 4650mAh (33.5Wh) Battery Comparable with Sony NP-QM91D For use with HVR-A1, HDR-HC1

	RAYNOX HD-5050PRO Wideangle Lens 0.5x HD High Definition Product code HD-5050 *Buy online from www.cameragrip.co.uk* Thread Size 37mm. with adapter rings for 27, 30, 30.5, 34, and 43mm Ideal for Sony A1/HC1/5/7, etc. The model HD-5050PRO Super Wideangle conversion lens is designed to broaden the angle of view, including 100% more area in the picture, when attached to the lens of Digital Video Camcorder. Its compatible with whole zoom area and stays in focus. 6-adapter rings are included for 25mm/27mm/ 30mm/30.5mm/ 37mm/ 43mm filter size Camcorders. The HD-5050PRO is made of the high-index optical glass elements with new concept of lens designing using three-group/four-element lens formula. This new concept in designing the lens made it possible to achieve an amazing high definition wideangle lens of the 600 lines/mm resolution power at center(MTF30%). Magnification : Nominal 0.5X Actual 0.5X/Diagonal,0.53X/Horizontal Lens construction : 3G/4E Optical coated glass elements Front filter size : 62mm Mounting threads : 37mm Size/Weight : 66 x 40mm/110g HD-5050PRO comes with 6-adapter rings for 27mm/ 30mm/30.5mm/ 34mm/43mm filter sizes.

	RAYNOX HD-3032PRO Semi-Fisheye Wideangle Lens 0.3x HD High Definition Product code HD3032 *Buy online from www.cameragrip.co.uk* Thread Size 37mm. with adapter rings for 27,30,30.5,34, and 43mm Ideal for Sony A1/HC1/5/7, plus other camcorders with above filter sizes. The model HD-3032PRO Semi-Fish Eye conversion lens is designed to broaden the angle of view, including 180% more area in the picture, when attached to the lens of Digital Video Camcorder or Digital Cameras. It's compatible with up to 6x zoom (Camcorder) area and stays in focus. Magnification : Nominal 0.3X On the camcorder : Actual 0.34X/Diagonal, 0.44X/Horizontal Lens construction : 2G/2E Optical coated glass elements Front filter size : None. Mounting threads : 37mm. Size/Weight : 70 x 45mm/143g Accessories included : Lens caps, Lens case, Instructions, 5-adapter rings are included for 27mm/ 30mm/ 30.5mm / 34mm/ 43mm filter sized Camcorders.	Camera's maximum wideangle view to Semi-Fish Eye angle of view in Video Clip taken with HD-3031PRO and Digital Video Camcorder

RETURN TO MAIN MENU

HOW TO ORDER

You can purchase the majority of our products online from www.cameragrip.co.uk
We do not have an on-line ordering service on this site.
Orders can be made by phone on +44 (0)115 987 0031
or by Fax on +44 (0)115 987 2900
or by e-mail sales@b-hague.co.uk
or by post to B. Hague & Co. Ltd. Mile End Road, Colwick, Nottingham, England. NG4. 2DW

TO ORDER We will require your name and address, name of product and product code.
If payment is by credit card, we will need name and address of card holder, card number, expiry date & security code ( this is the last set of numbers/digits on the other side of the card next to the signature ) plus issue number on switch cards. Orders by credit card can only be dispatched to the card holder's address.

PAYMENT - We accept VISA, MASTERCARD, DELTA, SWITCH & CONNECT CARDS, or CHEQUES in Sterling. ( WE DO NOT ACCEPT AMERICAN EXPRESS )
CARRIAGE COSTS in the UK – See above (UK Only).

SHIPPING COSTS to Europe & the rest of the world available on request.

B. Hague & Co. Ltd.
Mile End Road, Colwick,
Nottingham. NG4 2DW

Phone: +44 (0)115 987 0031
Fax: +44 (0)115 987 2900
E-mail: info@b-hague.co.uk

Hours of business

Monday - Thursday 8.00am. - 5.00pm.
Friday 8.00am. - 1.00pm.

All our products are on display in our showroom.
( Viewing by appointment )
Demonstrations - A chance to see and try before you buy!

December 2008

RETURN TO MAIN MENU