Tracking Systems
Tripod Tracking Dolly - Hi-Hat Table
Dolly - Ladder Dolly
Tracker "Ride-on" Tracking Dolly
|
|
Tracking Systems |
Buy online from www.cameragrip.co.uk
| HAGUE D5 |
TRIPOD TRACKING DOLLY |
 |
*
Enables you
to create super smooth
* Quick & simple HAGUE
TRIPOD TRACKING DOLLY |
|
|
8 radial ball |
The
dolly has two sets of locating holes for the tripod legs, which means the tripod
can be used in both high and low positions. It has eight radial ball bearing
wheels which set the track width to the correct positions as the dolly moves
down the track. The Tracking Dolly is ideal for use on location or in the
studio, all you need is a reasonably flat surface. The dollies width has been
set to allow it to go through doorways, it has its own levelling system which
prevents any rocking should the track be on uneven ground. It runs on
inexpensive 40mm dia. PVC pipe which can be supplied or is available from DIY
stores. The dolly will accept all tripods that have feet smaller than 45mm in
diameter or with a base spreader, 3 straps are supplied for securing your tripod to the dolly and also
supplied are 2 track connectors for joining your track.
See a video clip below
|
 |
|
HAGUE TRIPOD TRACKING DOLLY KIT |
|
Optional |
| CODE | ITEM | DETAILS |
PRICE exc.vat |
PRICE inc.vat |
| D5B | Padded transit bag | Rigid padded transit bag with carrying and shoulder straps, plus two wheels for pulling | 123.36 | 144.95 |
| SBAG | Soft padded bag | Soft padded transit bag with carrying straps | 72.30 | 84.95 |
| 565C | Spike foot shoes | Spike Foot Shoes. Set of 3 shoes with clamps, for Manfrotto, Libec and most Vinten tripods with twin spiked feet | 25.49 | 29.95 |
| D5ET | Extra track | Extra track for tripod tracking dolly - 2 x 1.5 metre | 11.87 | 13.95 |
| D5C | Extra track connectors | Extra track connectors x 2 | 7.62 | 8.95 |
| HAGUE HTD |
|
|
* A two in one product. * Hi-Hat with 100mm Bowl. *
Table Dolly
enables you
to create tracking shots * Quick release camera plate with claw-ball leveller. HAGUE HI-HAT
TABLE DOLLY |
The Hague Hi-Hat Table Dolly
enables you get tracking shots on a table, board or any smooth surface, the
50mm diameter wheels have radial ball bearings with twin rubber tyres which
make the dolly easy and quiet to move. The dolly will track in a straight
line or can be adjusted to track in an arc to go round an item. On top of
the dolly is a Hi-Hat with a 100mm bowl, this has two sets of spacing studs,
so extra low shots can be achieved. A quick release camera plate on a
claw-ball is also supplied so your camera can be attached directly to the
dolly and levelled off or angled using the claw-ball. Alternatively your
video head from your tripod can be used on the dolly enabling you to both
pan and tilt when tracking, we also supply a stepper ring to reduce down to
75mm should your tripods video head be using the 75mm levelling system. The Table Dolly can also be use as a Hi-Hat in a static position by using the supplied adjustable feet, this is ideal for low shots and where there is no space for a tripod. Dolly size:-
Length 33cm. Width 34cm. Height 10cm or 19cm. |
| HAGUE D8 |
LADDER DOLLY |
 |
*
Super smooth tracking shots over any terrain * Runs on an aluminum ladder * 100mm. Bowl for pro-video heads * Suitable for Pro-Camcorders * Leveling brackets included
HAGUE
LADDER DOLLY |
 |
The Ladder
Dolly will run on any aluminum ladder giving super smooth tracking shots.
It has a 100mm bowl onto which you can fasten your video head and camcorder.
Two adjustable brackets are supplied for supporting the ladder, plus a claw ball
leveller, enabling one of the brackets to be attached to your tripod.
 |
|
 |
As the ladder is above the ground tracking shots can be achieved over any terrain without the need for laying tracks on the ground. The dolly is fully adjustable for the different widths of ladders and the 8 radial ball bearing wheels, one of which has a brake, enable the dolly to be moved with ease.
See a video clip below
Dolly size:- 460mm/13"x330/13"x200/8"High. Weight:- 3kg. Supports up to 16kg.
Read a review by
Stewart Menelaws of Studio Scotland Ltd.
| CODE | ITEM | DETAILS |
PRICE exc.vat |
PRICE inc.vat |
| D8 | Ladder dolly | Ladder dolly - Kit includes:- Dolly with 100mm. Bowl, 2 - Ladder Brackets, 1 - 100mm. Claw-ball Leveller. | 353.19 | 415.00 |
| D8CB | Claw-ball | Extra 100mm. Claw-ball Leveller - enables the ladder to be suspended between two tripods | 31.45 | 36.95 |
| SR | Stepper Ring | Stepper Ring - Steps down from 100 to 75mm. to accept a head with a 75mm. half ball. | 18.00 | 21.15 |
| HAGUE D7 |
TRACKER |
*
A "Ride On" Tracking Dolly which is quick & simple to set up!
*
Telescopic column with a 100mm bowl
* Swivel seat *
12 metres of track *
Push/Pull handle.
HAGUE
TRACKER
D7
£850.22
exc.vat
£999.00
inc.vat
The Hague Tracker D7 is quick and simple to set up, it enables you to create super smooth tracking shots on location or in the studio. An aluminium frame forms the base of the "ride on" tracking dolly and attached to this is a telescopic column with a 100mm bowl & claw-ball leveller onto which you can fasten your video head. (The Hague range of Jibs can also be attached to this column). At the base of the column is a swivel seat, which allows you to move around the column when panning. The width of the dolly has been set to allow it to go through doorways. It runs on 50mm dia. PVC pipe which is held in position by the 8 radial ball bearing wheels which make the dolly easy to move along the track using the handle supplied.
Included in this kit are 6 x 2 metre lengths of track with connectors. Which gives a 6 metre run. Extra track and connectors are available if required.
Column height 110cm max. 72cm min. Dolly size 98cm x 68cm x 9cm. Weight 16kg.
| CODE | ITEM | DETAILS |
PRICE exc.vat |
PRICE inc.vat |
| D7 | Tracker |
Aluminium "Ride on" Dolly, 12 metres of Track (6x2m= 6 Metre
run), Track Connectors, Handle, Telescopic Column, 100mm Bowl and a Swivel
Seat. Also suitable for Hague Jibs K12, K14, K15, K16 & K18. |
850.22 | 999.00 |
| D7T | Extra track | Extra track for Tracker - 2 x 2 metre | 51.02 | 59.95 |
| D7C | Extra track connectors | Extra track connectors x 2 | 14.42 | 16.95 |
| SR | Stepper Ring | Stepper Ring - Steps down from 100 to 75mm. to accept a head with a 75mm. half ball. | 18.00 | 21.15 |
| LIBEC TR-320 |
TRACK & DOLLY SYSTEM |
LIBEC TR-320
TRACK & DOLLY SYSTEM
Product code TR-320
£995.74
exc.vat
£1170.00
inc.vat
The Libec TR-320 tracking dolly
system allows you to use your existing Libec tripod or pedestal to achieve super
smooth camera tracking movements. The track comes in 0.8 metre sections and can
be added to or reduced in length to suit the situation.
The standard package comes complete with 3.2 metres of straight track and an
universal dolly that packs down into a neat carrying case for location work.
Buy online from www.cameragrip.co.uk
|
HOW TO ORDER |
|
PAYMENT
- We accept VISA,
MASTERCARD, DELTA,
SWITCH & CONNECT CARDS,
or
CHEQUES in Sterling. US DOLLARS
and EUROS |
|
B. Hague
& Co. Ltd. Phone: +44 (0)115
987 0031 |
Hours of business Monday - Thursday 8.00am. - 5.00pm. All our products are on display in our
showroom. |
ALL WEIGHTS & SIZES ARE APPROXIMATE
UK VAT @ 17.5%
May 2008
Hi-Hat TABLE DOLLY