Telescopic Camera Stand
with
Remote Pan & Tilt Power Head

TELESCOPIC CAMERA STAND with REMOTE PAN & TILT POWER HEAD
Product code  TMTS    
Prices and more details at www.cameragrip.co.uk
 

Outdoor: As compared with the traditional view, the result is completely different and the image is greatly improved when taken from a higher view point.
It is recommended that you use the supplied guide ropes (stakes not supplied) when used outside to stabilize the stand and prevent swaying.

Indoor: Sometimes you may have to take a picture of a detail that is in an awkward position; it may be too high with bad lighting conditions. The traditional tripod is not high enough and, in some places, heavy duty scaffolding is forbidden.

Remote Pan & Tilt Power Head 
The electronic motorized Pan & Tilt Power Head fastens to the stand by an adaptor with a 1/4" stud.
The unit is battery operated with a wired remote control for both pan & tilt, it also has a variable speed control. It has been modified to pan 360 degrees and tilt up or down 15 degrees. We also supply a tilt correction plate which will allow the camera to tilt down 30 degrees from a level position, which is useful when the stand is being used for high shots.
The pan speed is variable between 4 to 8 degrees per second and the tilt is variable between 1.2 to 2.4 degrees per second ( speeds are approximate ). The Power Head is powered by 4 AA batteries. Size 145x115x103mm (5.75x4.5x4 inches)

Remote control for stills cameras - Most major camera producers are offering a remote control system to control your camera using your PC. You can control the settings and see the pictures shot in real time

The Stand is made of lightweight aluminium  and can be transported easily as it's closed length is only 173cm and it weighs just 10kg.

Kit includes: Telescopic Stand, 3 Guide Ropes (ground stakes not supplied), Levelling Bubble, Remote Pan & Tilt Power Head, Power Head Remote and Power Head Extension Cable, Tilt Correction Plate.