Aerial Mast Photography

 
All these products can be purchased online from www.cameragrip.co.uk

What is aerial mast photography?
Aerial mast photography is often referred to as elevated photography, ground-based, low-level and pole photography. Pictures taken from an aerial photography mast system produce an image from a "bird's eye view" perspective.

How does aerial mast photography work?
All aerial mast photography systems contain four key components: a telescopic mast, a digital camera, a remote control pan & tilt unit and a ground control unit.

Telescopic Masts
Telescopic masts for this application are typically either push up or pneumatic masts. Push up masts are raised manually by pushing each section of the mast up and locking in place with a clamp. A "bird's eye view" represented picture is typically achieved at mast heights of between 7 and 15 metres.

Potential Product Applications
Estate Agents (Residential and Commercial) - Indoor and Outdoor events and concerts - Corporate events - Sports grounds, stadiums and events - Weddings - Structural Engineers - Media Companies - Advertising Agencies - Local Authorities (Planning departments) - Land developers - Landscape designers - Schools, colleges and universities - Builders - Nature and wildlife - Surveillance...and many more.

Benefits & Features
No previous photography experience required - Single person operation - Very easy to use - Free standing - Portable and compact - Reliable - Year round use, indoor and outdoor.

 

TELESCOPIC CAMERA STAND with REMOTE PAN & TILT POWER HEAD, plus a CAMRANGER WIRELESS CONTROLLER
Product code  AMP2
Prices and more details at www.cameragrip.co.uk  

The Hague AMP2 kit includes:
T
he Telescopic Camera Stand which has a minimum height of 190cm and a maximum height of 730cm. Supplied with a Hague remote controlled pan and tilt power head and the Camranger Wireless DSLR Controller.

TELESCOPIC CAMERA STAND with REMOTE PAN & TILT HEAD
and a
Inspire LiveView Remote Control
Product Code AMPC for Canon 
Product Code AMPN for Nikon

Prices and more details at www.cameragrip.co.uk

The telescopic stand has a minimum height of 190cm and a maximum height of 730cm. It is supplied with a remote pan and tilt power head and an Inspire LiveView Remote Control with a built-in, 3.5” colour LCD on the hand-held transmitter that displays a LiveView image of the DSLR's picture.,

Hähnel Inspire LiveView Remote Control
Product Code HIC for Canon  Product Code HIN for Nikon
Prices and more details at www.cameragrip.co.uk
Ideal for wildlife, sport and even hazardous photography, the Inspire features a built-in, 3.5” colour LCD on the hand-held transmitter that displays a LiveView image independent of DSLR. You can then view these images from up to 60m away, ensuring that you take the perfect photo at exactly the right time.
Features: * 3.5” LCD displays LiveView image of the Camera. * Built-in camera gives LiveView image even for those DSLR’s without this feature. * Easily switch between DSLR LiveView & built-in CMOS camera view. * Playback the pictures taken without having to go back to the camera. * Control several cameras with one Inspire. * Several Power options for every situation. * Available for Canon & Nikon DSLR’s
MORE DETAILS   Buy online from www.cameragrip.co.uk

Pan & Tilt Power Head 
Product Code PH  £110.50 exc.vat  £132.60 inc.vat 

* Variable speed, * Battery operated, * Supports up to 2.7kg. 
* Cable remote control with 20ft. extension cable, * Auto pan mode

MORE DETAILS   Buy online from www.cameragrip.co.uk

Modified Power Head 
Product Code MPH  £127.50 exc.vat  £153.00 inc.vat 

* Pans 360 degrees, * Variable speed,  * Battery operated, * Supports up to 2.7kg. 
* Cable remote control with 20ft. extension cable, 
This is the same power head as above (PH), but has been modified to pan 360 degrees.

MORE DETAILS   Buy online from www.cameragrip.co.uk

Power Head Extension Cables
Product Code PHEC  £14.00 exc.vat  £16.80 inc.vat
6m.(20ft.) Extension cable for the power heads. PH/MPH/UPH

Product Code PHEC20   £39.00 exc.vat  £46.80 inc.vat
20m.(65ft.) Extension cable for the power heads. PH/MPH/UPH

POWER HEAD EXTENSION CABLE
Extra extension cables are available for the Power Heads which can be joined together to control the Power Head up to 60 metres away.

Replacement Pan & Tilt Controller 
Product Code PHR   £22.00 exc.vat  £26.40 inc.vat 

Suitable for Hague Power Heads PH, MPH & UPH
This replacement pan and tilt controller is suitable for Hague Pan & Tilt Power Heads PH/MPH/UPH plus other makes of power head of this type.

Buy online from www.cameragrip.co.uk

HAGUE TILT CORRECTION PLATE
Product Code TCP   £14.00 exc.vat. £16.80 inc.vat 

Suitable for Hague PH and MPH Remote Pan & Tilt Power Heads, plus other similar models.
Ideal for Aerial mast photography and when the power head is in a high position.
By using the Tilt Correction Plate the camera will start from a horizontal position and tilt down 30 degrees giving an extra 15 degrees of downward movement.

MORE DETAILS   Buy online from www.cameragrip.co.uk

Tilt Head 
Product Code PH234  
Prices and more details at www.cameragrip.co.uk

Can be used on top of the PH or MPH to change the angle of the camera.
The Power Heads PH & MPH have a tilt movement of +/- 15 degrees. However when used on top of a mast or in a high position you do not usually need the camera to point upwards, so by using the PH234 Tilt Head you can adjust the angle of the camera enabling you to make full use of the Power Heads 30 degrees of movement
Tilt Head with quick release camera plate
Product Code PH234RC  
Prices and more details at www.cameragrip.co.uk

Can be used on top of the PH or MPH to change the angle of the camera.
Tilt Head with quick release camera plate system and secondary safety lock.

The Power Heads PH & MPH have a tilt movement of +/- 15 degrees. However when used on top of a mast or in a high position you do not usually need the camera to point upwards, so by using the PH234RC Tilt Head you can adjust the angle of the camera enabling you to make full use of the Power Heads 30 degrees of movement
Clarke Mast Adaptor 
Product Code CMA   £21.50 exc.vat  £25.80 inc.vat

One of the most popular masts is the Clarke Pneumatic Mast. If you are using this type of mast, we have an adaptor which fastens and secures the Power Head to the top of the mast. Fastens the PH & MPH Pan & Tilt Power Heads to a Clarke Pneumatic Mast.
Stud size dia. 24mm x 95mm with a ¼” screw to secure the Power Head.

(Check that the bore size of the mast is 24-25mm)

Buy online from www.cameragrip.co.uk

USB Pan Tilt Controller 
Product Code USB   £58.00 exc.vat  £69.60 inc.vat 

Includes software (Windows only).
Ideal for Remote Photography. Suitable for Hague Power Heads PH, MPH & UPH

This USB controller allows the pan and tilt power head to be controlled from the USB port of a computer. This is particularly useful if you are using a camera with a USB connection.

MORE DETAILS   Buy online from www.cameragrip.co.uk


USB Extender

USB Extender & 30M Cat 6 Cable
Product Code USB30 
Prices and more details at www.cameragrip.co.uk

Ideal for Remote Photography - Suitable for Hague Power Heads PH, MPH & UPH
This USB Extender and cable enables you to use the USB Pan Tilt controller up to 30m from your computer.
USB EXTENDER - Connector type A:RJ45 Female - Connector type B:1 x USB A Male and 1 x USB A Female - Length, lead:45cm  - Cable type: USB Extender - Colour: Silver - Length / Height, external: 25mm
CAT 6 30M PATCH LEAD - GREY - Colour: Grey - Connector type A:RJ45 - Connector type B:RJ45 - Length 30m - Cable type: CAT 6 RJ45 Patch Cable

 

30M Cat 6 Cable


Buy online from www.cameragrip.co.uk
 

 

RETURN TO MAIN MENU

 

HOW TO ORDER


You can purchase online from
www.cameragrip.co.uk 
We do not have an on-line ordering service on this site.. 
Orders can be made by phone on  +44 (0)115 9599028
or by e-mail  sales@b-hague.co.uk 
or by post to B. Hague & Co. Ltd. Unit E2 Trent Park Trading Estate,
Little Tennis Street South, Nottingham, England. NG2 4EU 
 


TO ORDER
We will require your name and address, name of product and product code.
If payment is by credit card, we will need name and address of card holder, card number, expiry date & security code ( this is the last set of numbers/digits on the other side of the card next to the signature ) plus issue number on switch cards. Orders by credit card can only be dispatched to the card holder's address.

PAYMENT - We accept VISA,  MASTERCARD, DELTA, SWITCH & CONNECT CARDS, or CHEQUES in Sterling. ( WE DO NOT ACCEPT AMERICAN EXPRESS )  

SHIPPING COSTS to the UK, Europe & the rest of the world will automatically be calculated if purchased online from  www.cameragrip.co.uk 
or e-mail
sales@b-hague.co.uk  for a quotation.
 

  

 B. Hague & Co. Ltd.
 Unit E2 Trent Park Trading Estate
 Little Tennis Street South
 Nottingham
 NG2 4EUB

 Phone:  +44 (0)115 959 9028    
 E-mail: 
info@b-hague.co.uk

 
Hours of business

 Monday - Friday 8.00am. - 5.00pm.

 All our products are on display in our showroom.
 ( Viewing by appointment only - no children )
 Demonstrations -
A chance to see and try before you buy!
 

Sept 2013

RETURN TO MAIN MENU