Microphones - Radio mics - Mike Booms
Headphones - Adaptors - Accessories
from RODE - SENNHEISER - HAMA and HAGUE

       

MICROPHONES

BOOM POLES &
HEADPHONES

 ACCESSORIES

     

 Please visit our online sales site www.cameragrip.co.uk to see our full range and special offers.

 

RØDE’S VideoMic goes PRO!

SPECIAL OFFER  www.cameragrip.co.uk


The original RØDE VideoMic has been a runaway success, finding favour in broadcast and video production worldwide, and most recently in the emerging DSLR community. RØDE today took the wraps off their VideoMic Pro, firmly aimed at DSLR and small-format camera users, but with appeal to anyone looking for the most portable and practical mini-shotgun available…
The RØDE VideoMic Pro raises the bar set by the original RØDE VideoMic, combining broadcast quality audio with an ultra compact and lightweight ergonomic design.
Incorporating new features specific to high end video, the VMP also evolves many of the features that have made the VideoMic so successful. Noise transference has been significantly reduced using both a revised, more elegant shock mounting system and a lightweight premium cable.
Notably, beyond the reduction in size the VideoMic Pro is also centrally balanced, making it possible to use in conjunction low cost free-moving camera stabilisation systems.
 

Key features include:

• Broadcast recording quality condenser microphone
• Compact design (only 150mm/6" length)
• Ultra lightweight (only 85g/3oz)
• 9V battery powered, with up to 70 hours battery life (alkaline)
• Integrated shock mounting
• Integrated foam windshield
• 3.5mm stereo mini-jack output (dual mono)
• Two step High Pass Filter (flat, 80Hz)
• Three position level control (-10dB, 0, +20dB)
• Camera shoe mount with 3/8" thread for easy boompole mounting
 

On SPECIAL OFFER at www.cameragrip.co.uk

 

MICROPHONES

 

Hähnel MK100 Uni-Directional Microphone
Product Code MK100  
MORE DETAILS & on SPECIAL OFFER from www.cameragrip.co.uk
Good video deserves great sound!
Ideal for DSLR & Camcorders, Broadcast Quality Electret Condenser Microphone
This Microphone is designed for use with modern DSLR’s, Camcorders and Audio Recorders. The hähnel MK100 is fitted with a 14mm electret condenser capsule which produces high quality audio with a uni-directional pick-up. This is achieved using a Super Cardiod design, ensuring maximum sound input from the front of the microphone, resulting in targeted audio recordings with minimum interference from both sides and behind.

MORE DETAILS

Fostex AR-4i. for Apple i-Phone 4/4S
Product Code AR4i   
MORE DETAILS & on SPECIAL OFFER from www.cameragrip.co.uk  
iPhone not included.

The iPhone 4 is fabulous and takes great HD quality video. However if there’s one area that lets it down, it’s the sound. The small internal microphone only records in mono with no control and as for the quality.... Well let’s just say it not exactly high-fidelity. Enter the new Fostex AR-4i. Offering excellent quality stereo audio recording, (via Dock connector and in-built AD/DA converter), with LED input level metering, gain control and headphone monitoring, the AR-4i has been designed to  dramatically increase the quality of the sound of the videos you take with your iPhone 4.
MORE DETAILS

RODE SHOTGUN MICROPHONE
Product code NTG-1

Directional Condenser Microphone
The RODE NTG-1 is a lightweight condenser shotgun microphone, specifically designed for professional applications within the film, video, television, voice-over and ENG industries.

MORE DETAILS & on SPECIAL OFFER from www.cameragrip.co.uk

RODE SHOTGUN MICROPHONE
Product code NTG-2

Dual Powered Directional Condenser Microphone.
The RODE NTG-2 is a lightweight condenser shotgun microphone, designed for professional applications within the film, video, television and production industries.

MORE DETAILS & on SPECIAL OFFER from www.cameragrip.co.uk

RODE BROADCAST SHOTGUN MICROPHONE
Product code NTG-3

Precision broadcast-grade shotgun microphone
The NTG-3 is the result of years of development by RØDE engineers, providing the professional broadcast and film industries with an affordable yet uncompromising microphone.

MORE DETAILS & on SPECIAL OFFER from www.cameragrip.co.uk

RODE VideoMic (MONO)
Product code VM

The RØDE VideoMic is a professional grade shotgun microphone. Based on the latest ‘Film industry’ technology, the VideoMic is designed specifically for use with high quality Digital Video Cameras.
 

MORE DETAILS & on SPECIAL OFFER from www.cameragrip.co.uk

RODE Stereo VideoMic
Product code SVM


The RØDE Stereo VideoMic X-Y Condenser Microphone with switchable pad & filter. Battery powered. Supplied with suspension mount and a furry windshield. The microphone attaches to the camera via the Hot Shoe found on the top of most video cameras. Connects to camera by Stereo 3.5mm Mini Jack.

MORE DETAILS & on SPECIAL OFFER from www.cameragrip.co.uk

SENNHEISER MKE 400 MICROPHONE
Product code MKE400 

General Description
Rugged, compact and versatile for great video sound: The MKE 400 is a small shot gun microphone for cameras with a lighting shoe mount and external microphone input.

MORE DETAILS & on SPECIAL OFFER from www.cameragrip.co.uk

DIRECTIONAL STEREO MICROPHONE
Product code 46112
- Reversible directional characteristic: Cardioid, super cardioid
- Frequency range: 100 - 10.000 Hz - Sensitivity:
- Normal: - 50dB +/- 5dB
- Zoom -46 dB +/- 5dB
- Cable length: 20 cm
- Connection: 3.5 mm stereo plug
- Battery: 1 x Mignon AAA (not supplied)

MORE DETAILS & on SPECIAL OFFER from www.cameragrip.co.uk

DIRECTIONAL STEREO MICROPHONE
Product code 46114

-Electret capacitor microphone
- With 2-stage selectable directional characteristics
- With permanently attached shoe and windshield


MORE DETAILS & on SPECIAL OFFER from www.cameragrip.co.uk

STEREO MICROPHONE
Product code RMV02  
Condenser stereo microphone with strong unidirectional characteristic. Includes windshield. Fits to the camcorder's accessory shoe or mike stand
Characteristic: cardioid
Frequency range: 100 – 13 000 Hz.  Sensitivity: - 65 dB ± 3 dB
Impedance: 600 ohms.   Cord: - coiled cable 1m. extended length for use on camera, or 7.5m. straight cable for the application as reporter microphone
Connection: 3.5 mm stereo jack plug + adapter 1 x 3.5mm stereo socket to 2 x 6.3mm mono jack plugs.
MORE DETAILS & on SPECIAL OFFER from www.cameragrip.co.uk
ZOOM MICROPHONE (MONO)
Product code RMZ
"Outdoor reporter" condensor microphone with selectable directional characteristics. Includes windshield. Fits to the camcorder's accessory shoe, hand held or mike stand.
Type of microphone: Condenser
Characteristic: cardioid
Frequency response: 100 - 13 000 Hz
Sensitivity: -56 dB/- 70 dB
Impedance: 1 kOhms / 2.3kOhms
Cable: - coiled cable 1m. extended length for use on camera, or 7.5m. straight cable for the application as reporter microphone
Connection: 3.5 mm mono jack plug + adapter to 6.3mm mono jack plug.
MORE DETAILS & on SPECIAL OFFER from www.cameragrip.co.uk
LAVALIER MICROPHONE (MONO)
Product code LM09

Ideal tie clip microphone for video use
Supplied with clip and wind shield
Supplied without battery
Characteristic: omnidirectional
Frequency range: 50 - 16 000 Hz Sensitivity: - 65 dB ± 3 dB  
Impedance: 900 ohms.  Cable: 6m.   Connection: 3.5 mm male mono plug
Adapter: 6.3 mm mono and 1.5 V battery included.
Colour: Black.
MORE DETAILS & on SPECIAL OFFER from www.cameragrip.co.uk
  RADIO MICROPHONES  
SENNHEISER RADIO MICROPHONE     
Product code EW112P

The 122-p G2 system is ideal for video recording theatre performances and presentations. The ME 4 clip-on microphone is virtually invisible and has excellent feedback rejection. The extremely small SK 100 G2 bodypack transmitter and EK 100 G2 camera receiver feature nine frequency banks with four directly accessible presets each – ready for immediate use.

MORE DETAILS & on SPECIAL OFFER from www.cameragrip.co.uk

  MICROPHONE BOOM POLES

 

GITZO BOOM POLES

Gitzo booms are designed for performance and reliability that meet location sound and broadcast audio professionals’ requirements.

Prices and more details at www.cameragrip.co.uk

RODE BOOM POLE
Product code RBP
MORE DETAILS & on SPECIAL OFFER from www.cameragrip.co.uk

3m Aluminium Boom Pole
Machined from high grade aluminium, the boom pole is designed for applications where a 3m extension pole for shotgun microphones is required.
Attaches to the RM5 Stand Mount (NTG-1 & NTG-2) and VideoMic via its 3/8” thread or any standard 3/8” threaded fitting. ( Length: 0.84m - 3m / 33” - 10’ )

RODE MINI BOOM POLE
Product code RMBP
MORE DETAILS & on SPECIAL OFFER from www.cameragrip.co.uk

2m Aluminium Boom Pole
Machined from high grade aluminium, the boom pole is designed for applications where a 2m extension pole for shotgun microphones is required.
Attaches to the RM5 Stand Mount (NTG-1 & -NTG-2) and VideoMic via its 3/8” thread or any standard 3/8” threaded fitting.

 

BUDGET  MICROPHONE  BOOM
Product code BMB1  
Prices and more details at www.cameragrip.co.uk

Telescopic Microphone Boom - two sections
Minimum length 1.2m. Maximum length 2.2m.
Lightweight alloy - Weight 650g.  Includes microphone holder.

BUDGET  MICROPHONE  BOOM
Product code BMB2  
Prices and more details at www.cameragrip.co.uk

Telescopic Microphone Boom - three sections
Minimum length 1.2m. Maximum length 3.2m.
Lightweight alloy - Weight 900g.  Includes microphone holder.

  MICROPHONE ACCESSORIES  
XLR Microphone cable x 6m. long
Product code RXLR-1
Prices and more details at www.cameragrip.co.uk

6 metre long - XLRF to XLRM microphone (Black) cable for Rode NTG-1, NTG-2

Short XLR Microphone cable x 300mm. long
Product code RXLR-2
Prices and more details at www.cameragrip.co.uk

A short cable for camcorder mounting - XLRF to XLRM microphone (Black) cable for Rode NTG-1, NTG-2

Microphone cable XLR to 3.5 Stereo Plug  x 6m. long
Product code RXLR-3
Prices and more details at www.cameragrip.co.uk 

5 metre long - XLRF to 3.5 stereo jack.   Microphone cable for Rode NTG-2
Enables the Rode NTG2 or similar to be used on a camcorder with a 3.5mm stereo jack socket.

Microphone cable XLR to 3.5 Stereo Plug  x 2m. long
Product code RXLR-4
Prices and more details at www.cameragrip.co.uk

2 metre long - XLRF to 3.5 stereo jack.   Microphone cable for Rode NTG-2
Enables the Rode NTG2 or similar to be used on a camcorder with a 3.5mm stereo jack socket.

RODE Extension Cable
Product code VC1  
Prices and more details at www.cameragrip.co.uk

3m. Mike extension cable - 3.5mm Male plug - 3.5mm Female socket

RODE XLR Converter
Product code VXLR  
Prices and more details at www.cameragrip.co.uk

3.5mm Stereo mini jack socket to XLR - enables the Rode Videomic to be used in a XLR input.

3.5mm Stereo jack Converter
Product code MS35  
Prices and more details at www.cameragrip.co.uk

Allows a 3.5mm mono jack plug to be used with a 3.5mm stereo jack socket - Ideal for mono microphones into stereo camcorders.

RODE DEAD CAT
Product code VMDC
Prices and more details at www.cameragrip.co.uk

High wind cover, suitable for Rode's Videomic, NTG-1, NTG-2 and Hama RMZ

RODE DELUXE WINDSHIELD WS6
Product code WS6
Prices and more details at www.cameragrip.co.uk

The RØDE WS6 Deluxe Windshield is designed to reduce wind noise when recording in adverse environmental conditions.
Suitable for the RØDE NTG-1 and NTG-2, as well as any shotgun microphone with a maximum slot length of 160.5mm (6 1/4”) and a diameter of 21-22.5mm.

RODE DELUXE WINDSHIELD WS7
Product code WS7
Prices and more details at www.cameragrip.co.uk

The RØDE WS7 Large Deluxe Windshield is designed to reduce wind noise when recording in adverse environmental conditions.
Suitable for the RØDE NTG-3 as well as any shotgun microphone with a maximum slot length of 186.5mm (7 1/4”) and a diameter of 19-20mm.

SENNHEISER MZW400 ACCESSORY KIT
Product code MZW400  £39.96 exc.vat  £46.95 inc.vat.
Prices and more details at www.cameragrip.co.uk 

Professional Accessory Kit  MZW 400 for Sennheiser MKE 400 Microphone

Professional Accessory Set, includes hairy cover and 3.5 mm jack socket to XLR adapter

RODE SUSPENSION MOUNT
Product code NTSM4
Prices and more details at www.cameragrip.co.uk

NTSM4 Suspension Shock Mount - (Stand Adaptor)
A shotgun microphone suspension shock mount with a stand mount adaptor. The NTSM4 shock mount is designed to significantly reduce vibration transmission to shotgun microphones.
Features a 4-way rubber suspension with friction tilt mechanism to aid directional positioning. A three way mounting system with 1/4” x 20 and 3/8” x 16 internal threads, a 5/8” x 27 and a 3/8” to 5/8” thread adaptor for Tripod, Boom Pole and mic stand mounting.
Also, the perfect accessory for Rode NTG1, NTG2 and Hama RMZ10, RMV02


Picture shows Suspension Mount (NTSM4) on Boom Pole (RBP)

RODE SUSPENSION SHOE MOUNT
Product code NTSM3
Prices and more details at www.cameragrip.co.uk

NTSM3 Suspension Shock Mount - (Cold Shoe Adaptor)
The NTSM3 is a shock mount designed to significantly reduce vibration transmission to all shotgun microphones. Perfect for the RØDE NTG series. Features a 4-way rubber suspension system with quick release tilt mechanism to aid directional positioning and avoid visual intrusion.
A three way mounting system with 1/4”x 20 and 3/8" 16 internal threads for Boom Pole or Tripod mounting and a standard hot shoe adaptor for direct camera mounting.
Also, the perfect accessory for Rode NTG1, NTG2 and Hama RMZ10, RMV02

RODE SUSPENSION SONY/PANASONIC MOUNT
Product code NTSM5
Prices and more details at www.cameragrip.co.uk

NTSM5 Suspension Shock Mount - (Clamp Adaptor)
A shotgun microphone suspension shock mount for high end video cameras. The SM5 shock mount is designed specifically to fit Panasonic® and Sony® video cameras with clamp mounts. Features a 4-way rubber suspension with an integral Ø24 mm and Ø27 mm clamp mount adaptor.
The SM5 incorporates a two way mounting system with 1/4"x 20 and 3/8" x 16 internal threads, for Tripod and Boom Pole mounting.

ANTI-VIBRATION MICROPHONE HOLDER
Product code AVM 
Prices and more details at www.cameragrip.co.uk

Reduces camera and handling noise as the microphone is suspended in a rubber mount. Adjustable tilt, suitable for microphones with a 25-30mm. body diameter. Standard 5/8"thread, plus two adaptors 1/4" to 3/8" and 3/8" to 5/8"

CLIP-TYPE MICROPHONE HOLDER
Product code CTM
Prices and more details at www.cameragrip.co.uk

This adjustable clip-type microphone holder is suitable for holding most types of microphones.
Standard 5/8"thread, plus two adaptors 1/4" to 3/8" and 3/8" to 5/8"

RODE PG2 PISTOL GRIP SHOCK MOUNT 
Product code PG2
Prices and more details at www.cameragrip.co.uk

The RØDE PG2 Pistol Grip Shock Mount is designed to reduce handling noise when recording with shotgun microphones.
It supports microphones with a diameter of 19-20mm or 21-22.5mm using the supplied interchangeable mounts, and a handy release lever on the mount allows for quick and easy adjustment of the microphone angle.

RODE BLIMP WINDSHIELD and PISTOL GRIP
Product code BLIMP  
Prices and more details at www.cameragrip.co.uk

Complete windshield and pistol grip system for NTG series shotgun mics, plus all other makes of  shotgun mics up to 425mm in length.

RODE PG1 COLD SHOE PISTOL GRIP 
Product code PG1
Prices and more details at www.cameragrip.co.uk

The Rode PG1 Cold Shoe Pistol Grip is a convenient and ergonomic way to operate your RØDE VideoMic, Stereo VideoMic or other cold/hot shoe compatible device independently of your video camera.

MICROPHONE HANDGRIP
Product code MH  
Prices and more details at www.cameragrip.co.uk

The Handgrip is ideal for handheld microphone use, it has a 1/4" stud with adaptors for stepping to 3/8" and 5/8" plus a shoe adaptor for microphones which would normally be attached to the camcorder's accessory shoe.
Pictures - Left shows Microphone Handgrip with adaptors. Right shows with an optional microphone attached.

MICROPHONE STAND with BOOM
Product code MSB 
Prices and more details at www.cameragrip.co.uk

MICROPHONE STAND, WITH BOOM

All metal construction. Large round knobs. Dual thread 5/8" and 3/8". Supplied with cable clips. Boom length: 800mm. Adjustable height main: 1000-1760mm. Folding, tripod metal base. Depth, External: 85mm. Length: 1000mm. Weight: 2.54kg. Width, External: 100mm.
Folded dimensions:  1000x100x85mm. Weight: 2.54kg.

MICROPHONE BRACKET
Product code MB58
Prices and more details at www.cameragrip.co.uk

Enables a microphone holder or a gooseneck to be mounted to a table wall etc.

Base diameter 45mm. Thread size 5/8" (standard microphone clamp thread). Colour Black

GOOSENECK MICROPHONE HOLDER
Product code GN 
Prices and more details at www.cameragrip.co.uk

Gooseneck microphone holder - Flexible, bend to the required position, can be mounted to a microphone stand or to our Microphone Bracket MB58.

Diameter 15mm. External thread size 5/8" (standard microphone clamp thread). Internal thread 5/8". Length 380mm.  Colour Black

MICROPHONE TABLE CLAMP
Product code MTC
Prices and more details at www.cameragrip.co.uk

MICROPHONE STAND, TABLE CLAMP
A metal clamp for mounting microphones or goosenecks onto the edges of tables or panels.
5/8" and 3/8" screw-thread. Clamp capacity: 43mm. Depth External: 45mm. Height: 85mm. Weight: 260g. Width External: 70mm. Dimensions (HxWxD): 85x70x45mm. Weight: 260g

MICROPHONE GOOSENECK DESK STAND
Product code MGDS
Prices and more details at www.cameragrip.co.uk

MICROPHONE DESK STAND with GOOSENECK
Flexible Gooseneck microphone holder - Bend to the required position.
External thread size 3/8" A
Conversion Bush (CB3) will be needed if the microphone holder is 5/8".
Colour Black
. Heavy cast, anti-vibration base. Gooseneck metal stem. Height: 315mm. Dia. of base: 130mm. Screw thread: 3/8". Weight: 1.28kg.

MINI MICROPHONE DESK STAND
Product code MDS
Prices and more details at www.cameragrip.co.uk

MINI MICROPHONE DESK STAND with 5/8" thread. (standard microphone clamp thread).

Heavy cast base. Metal stem. Height: 100mm. Dia. of base: 115mm. Screw thread: 5/8".

Weight: 0.58kg.

MINI-CLAMP
Product code MC

Prices and more details at www.cameragrip.co.uk

The Mini-Clamp clamps to anything up to 38mm. in diameter, it can be mounted either vertically or horizontally and has a ball & socket tilt head with a 1/4" mounting screw.
Ideal for microphone, monitors, lightweight cameras etc.

  
Weight:- 150g. Size approx 100mm. x 100mm. x 45mm.

CONVERSION BUSHES
Product Code CB3 
Prices and more details at www.cameragrip.co.uk

Set of 3 Conversion Bushes

1 - 3/8" internal thread to 5/8" external thread (standard microphone thread). Diameter 18mm.
2 - 1/4" internal thread to 3/8" external thread.

CONVERSION BUSH
Product Code CB2 
Prices and more details at www.cameragrip.co.uk

Conversion Bush

5/8" internal thread
(microphone stand) to 3/8" external thread .
Diameter 20mm. Total length 35mm.

CONVERSION BUSH
Product Code M015 
Prices and more details at www.cameragrip.co.uk

Conversion Bush

3/8" internal thread to 1/4" external thread (camera screw).
Diameter 15mm. Total length 20mm.

 

SHOE MOUNT with 1/4" STUD
Product Code SMS 
Prices and more details at www.cameragrip.co.uk

Shoe Mount with 1/4" Stud and Locking Nut
This standard sized accessory shoe has a 1/4" stud that allows it to be screwed into the 1/4" threaded hole found on most professional camcorders. It is secured into position by locking the knurled nut.
The Shoe Mount enables you to attach a camcorder light or microphone.

SHOE BRACKET
Product Code H6811
Prices and more details at www.cameragrip.co.uk

Some camcorders do not have an accessory shoe, so you are unable to attach lights, microphones, etc.
The Shoe Bracket simply screws into the base of the camcorder and is adjustable sideways. There is also a 1/4" thread in the thumb screw so a tripod camera plate could also be attached.
Made of plastic. Size 30 x 170 mm.  

DOUBLE SHOE BRACKET
Product code DSB
Prices and more details at www.cameragrip.co.uk

Fits to the accessory shoe of the camcorder, enables a microphone and light to be attached to the camera.
Choice of three mounting holes. Size:- 150 x 25 x 10mm.

TRIPLE SHOE BRACKET
Product code TSB
Prices and more details at www.cameragrip.co.uk

Fits to the accessory shoe of the camcorder, enabling a microphone, light, radio mic etc. to be attached to the camera.
Choice of three mounting shoes. Size:- 80 x 45 x 30mm.

SHOE ACCESSORY KIT
Product code SAK
Prices and more details at www.cameragrip.co.uk

The kit includes a shoe clamp with 2 locking nuts, a mini ball head, a 1/4" to 3/8" adaptor, a 3/8" to 5/8" microphone adaptor.
SINGLE SHOE ADAPTOR
Product Code SSA
Prices and more details at www.cameragrip.co.uk

Only suitable for Sony camcorders with a small shoe and a 3.5mm mic input.
Ideal for Sony HC1/7

The HC1/7, along with some other Sony camcorders, does not have a standard size accessory shoe so you are unable to attach other manufacturers microphones, lights etc. The Single Shoe Adaptor converts the shoe on the camcorder to a standard sized one. It is raised by 20mm to clear the  shoe cap making it easy to attach microphones, lights etc.
 
(Picture right shows Rode VideoMic attached to the HC1 using the Single Shoe Adaptor)

 

 

 

 

 

DOUBLE SHOE ADAPTOR
Product Code DSA 
Prices and more details at www.cameragrip.co.uk

Only suitable for Sony camcorders with a small shoe and a 3.5mm mic input.
Ideal for Sony HC1/7

The Double Shoe Adaptor converts the small Sony camera shoe (HC1/7) to a twin standard size shoe, enabling two accessories to be mounted at the same time. ie microphone and light.
(Picture right shows Rode VideoMic and a video light attached to the HC1 using the Double Shoe Adaptor)

HAGUE SHOE ADAPTOR for Canon HF100/10
Product Code CSA  
Prices and more details at www.cameragrip.co.uk

Only suitable for Canon HF100 and HF10 plus other new Canon camcorders with a small accessory shoe
The HF100/10, along with some other new Canon camcorders, do not have a standard size accessory shoe so you are unable to attach other manufacturers microphones, lights etc. The Shoe Adaptor converts the small shoe on the camcorder to a standard sized one. It is raised by 20mm to clear the zoom control on some models making it easy to attach microphones, lights etc.

DOUBLE SHOE ADAPTOR for Canon
Product Code CDSA 
Prices and more details at www.cameragrip.co.uk
 
Only suitable for Canon camcorders with a small shoe and a 3.5mm mic input.
HAGUE SINGLE SHOE RAISER
Product Code HSR 
Prices and more details at www.cameragrip.co.uk

Ideal for Panasonic HDC HS,TM,SD 700
The Panasonic HS700, TM700 and SD700 all have a standard size accessory shoe, but it is in a recess which makes it difficult to attach some microphones and lights. The HSR Hague Shoe Raiser solves this problem as it raises the height by 26mm making it much easier to attach a microphone or a light.
HAGUE DOUBLE SHOE ADAPTOR for Panasonic HS/TM/SD700
Product Code PDSA 
Prices and more details at www.cameragrip.co.uk

Ideal for Panasonic HDC HS,TM,SD 700
The Panasonic HS700, TM700 and SD700 all have a standard size accessory shoe, but it is in a recess which makes it difficult to attach some microphones and lights. The PDSA Double Shoe Adaptor solves this problem as it raises the height by 30mm and offers two accessory shoes to easily attach a microphone and light.
     

HEADPHONES
full details at
 www.cameragrip.co.uk

 

RETURN TO MAIN MENU

 

HOW TO ORDER


You can purchase online from
www.cameragrip.co.uk 
We do not have an on-line ordering service on this site.. 
Orders can be made by phone on  +44 (0)115 9599028
or by e-mail  sales@b-hague.co.uk 
or by post to B.Hague & Co. Ltd. Unit E2 Trent Park Trading Estate,
Little Tennis Street South, Nottingham, England. NG2 4EU 
 


TO ORDER
We will require your name and address, name of product and product code.
If payment is by credit card, we will need name and address of card holder, card number, expiry date & security code ( this is the last set of numbers/digits on the other side of the card next to the signature ) plus issue number on switch cards. Orders by credit card can only be dispatched to the card holder's address.

PAYMENT - We accept VISA,  MASTERCARD, DELTA, SWITCH & CONNECT CARDS, or CHEQUES in Sterling. ( WE DO NOT ACCEPT AMERICAN EXPRESS )  

SHIPPING COSTS to the UK, Europe & the rest of the world will automatically be calculated if purchased online from  www.cameragrip.co.uk 
or e-mail
sales@b-hague.co.uk  for a quotation.
 

  

 B.Hague & Co. Ltd.
 Unit E2 Trent Park Trading Estate
 Little Tennis Street South
 Nottingham
 NG2 4EUB

 Phone:  +44 (0)115 959 9028    
 E-mail: 
info@b-hague.co.uk

 
Hours of business

 Monday - Friday 8.00am. - 5.00pm.

 All our products are on display in our showroom.
 ( Viewing by appointment only - no children )
 Demonstrations -
A chance to see and try before you buy!
 

March 2014

RETURN TO MAIN MENU