Jibs, Cranes and Booms
from Hague and Libec

 
All these products can be purchased online from www.cameragrip.com
 

HAGUE HANDY-JIB K1
Product code K1

  As seen on Channel 5's Gadget Show
Supports up to 1.5kg.
The Hague Handy-jib is great fun to use, you can create crane and tracking shots with ease, its ideal for all lightweight camcorders.

MORE DETAILS

HAGUE JUNIOR JIB K2  - MORE DETAILS
Product code
K2
HAGUE JUNIOR JIB complete with STAND - MORE DETAILS
Product code
K2WS

Supports up to 3kg.
The Hague Junior Jib fastens to any sturdy tripod. Your camcorder attaches directly to the jib arm's camera plate. There is an attachable counterbalance arm complete with weights, plus an adjustable fine trim weight.
 
HAGUE MINI JIB K3 with TILT CONTROL
Product code K3

The Hague Mini Traveller Jib K3 is small, compact, lightweight and easy to take anywhere. Measuring just 82cm for transit, and weighing just 2kg, this jib is ideal for people on the go. It’s ideal for both DSLRs and all handheld camcorders under 3kg. The Mini Jib is fastened directly to the video head of any sturdy tripod.

An additional feature of the Mini Jib is the ability to mount the jib horizontally so you can create sideways tracking movement, similar to a slider, or the camera can be positioned to move forward or back. Combine this with using the pan bar on the video head and some very unusual shots can be achieved.

MORE DETAILS

HAGUE HDV BOOM K8 with TILT CONTROL
Product code K8

Supports up to 4kg.

The new Hague HDV Boom K8 has been developed to support the new range of HD camcorders such as the Sony Z1, V1, A1 etc. plus all other “handheld” camcorders under 4kg.. The boom is fastened directly to the video head of any sturdy tripod, in the same way you would attach your camcorder, it can be mounted using both 1/4” and 3/8” screws.
MORE DETAILS

HAGUE CAMCRANE K9 with STAND & CAMERA TILT CONTROL
Product code K9

Supports up to 2.5kg.
The Hague CamCrane K9 is quick and simple to set up and is supplied with it's own Stand. It supports cameras up to 2.5kg. and is ideal for handheld camcorders and DSLRs.
Once balanced the camera can smoothly move from ground level to over 5 metres high and the crane will pan 360 degrees on the stand.

MORE DETAILS

HAGUE CAMCRANE K10 with STAND and REMOTE PAN & TILT HEAD
Product code K10

Supports up to 2.7kg.
The Hague CamCrane K10 is quick and simple to set up, it is supplied with its own Stand and a Remote Pan & Tilt Power Head. Once balanced the camera can smoothly move from ground level to almost 4 metres high and the crane will pan 360 degrees on the stand. You can also pan and tilt the camera on the end of the crane by using the wired remote control.

MORE DETAILS

HAGUE MULTI-JIB K12
Product code 
K12

Supports up to 14kg.

The Multi-Jib fastens to any pro-tripod with a 100 or 75mm. bowl or a Hague dolly. It is quick and simple to set up and can be used at three different lengths. At it's standard or short length it will support up to 14kg. and at it's longest length will support up to 9kg.
MORE DETAILS.

HAGUE PRO - JIB K14
Product code K14

Supports up to 14kg.

The Hague Pro-Jib has been designed for use with heavier cameras, to support a maximum weight of 14 kilos. The telescopic counterbalancing arm uses standard bar weights for counterbalance (not supplied).

MORE DETAILS

HAGUE CAMCRANE K18 with choice of REMOTE PAN & TILT POWER HEAD

Product code K18/UPH 
  Supports up to 2kg. - MORE DETAILS

Product code K18/PH200
  Supports up to 4kg. - MORE DETAILS

It’s ideal for both handheld camcorders and DSLRs.
The Hague CamCrane is supplied with a choice of power head, the UPH remote pan and tilt power head for light cameras, or the PH200 remote pan and tilt power head with joystick control for cameras up to 4kg.
The CamCrane K18 is quick and simple to set up, it attaches to any sturdy 100 or 75mm "bowl type" tripod or can be supplied with the optional Hague Dolly D3. 

LIBEC JB-30U JIB ARM
Product code JB30U  
Prices and more details at www.cameragrip.com

Supports up to 20kg.
Quick and easy set up. Light weight mobile. Camera mounting bowl accepts either 100mm or 75mm diameter heads. Easy reverse bowl for extremely low camera angles. Easily adjusting main arm.
TRIPOD, DOLLY & WEIGHTS NOT INCLUDED

Optional Accessories

HAGUE TRIPOD LEG CLAMPS x 3
Product code TLC3
Prices and more details at www.cameragrip.com
Suitable for Manfrotto Tripod Legs  546/545/542/525/520/515/500/545/546. plus other tripods with twin leg top sections that are 90mm apart and are 14-16mm in diameter.

The leg clamps help prevent the leg slipping when a Jib/Crane or any other heavy item is mounted to the tripod. The clamps also have a 1/4" threaded mounting hole to attach an articulated arm, on which can be mounted a monitor or other accessory, to the tripod.
The clamp is fastened to the top section of a twin legged tripod and secured just above the tripods leg clamp once the height has been set, this prevents the leg slip
1 x 5kg. COUNTERBALANCE WEIGHT
Product code K8W  Prices and more details at www.cameragrip.com

4 x 5kg. COUNTERBALANCE WEIGHTS (20kg)
Product code SBW  Prices and more details at www.cameragrip.com

The Hague range of Jibs, Cranes and Booms are not supplied with weights. These can be purchased individually or as a set of 4. Each weight is 5kg., the amount required will vary depending on the weight of camera and the length the jib is set at. The K8 usually requires 1 or 2 weights, the others may need up to 20kg.

HAGUE JIB & CRANE DOLLY D3
Product code D3
Prices and more details at www.cameragrip.com

Ideal for Hague Jibs & Cranes K12, K14, K16DV & K18

The Hague Dolly D3 has been designed for use with the Hague range of jibs K12, K14, K16DV & K18. The three leg frame fastens to the dolly with a handwheels, making it quick and simple to set up. The large 100mm individually braked swivel wheels enable the dolly to be moved with ease. The aluminium dolly folds for easy transportation.

Suitable for Hague Jibs K12,K14,K16DV, K18 - Height 110cm. – Weight 8kg.
Price includes:- Dolly with 100mm dia. Swivel Wheels, Three leg stand.

HAGUE BEARING BLOCK
Product code BB
Prices and more details at www.cameragrip.com

Suitable for Hague CamCranes K9 & K10

The Bearing Block enables the CamCranes K9 or K10 to be attached to a suitable tripod instead of the stand. The tripod needs to be a sturdy 100 or 75mm "bowl type".

STEPPER RING
Product code
SR
 
Prices and more details at www.cameragrip.com

The Stepper Ring enables a Pan & Tilt Head with a 75mm levelling system to be used on our 100mm Bowl.

Suitable for our 100mm Bowl Mounts LH100, CBM, BMS, BM, THM, BM100.
Dollies HTD, D2, D8, D7.
Jibs K12, K14.

HAGUE 75mm BOWL
Product code
75B
Prices and more details at www.cameragrip.com

The 75mm Bowl replaces the 100mm Bowl used on several of our product. This enables a Pan & Tilt Head with a 75mm levelling system to be used without the need of a stepper ring.

Suitable for our 100mm Bowl Mounts LH100, CBM, BMS, BM, THM, BM100.
Dollies HTD, D2,
D7, D8.
Jibs K12, K14.

BALANCE CORRECTION ADAPTOR
Ideal for DSLR cameras
Product code BCA 
Prices and more details at www.cameragrip.com
When mounting a camera to a jib or crane, it helps if the camera's mounting hole is in the centre of balance. Unfortunately not all camcorder and camera manufacturers put the mounting hole at the centre of balance, which means the camera could be front or back heavy, or the mounting hole could be offset to the side. Larger batteries or interchangeable lenses will also affect the balance; this is particularly prevalent with Digital SLR cameras.
The Balance Correction Adaptor solves this problem, as the camera can be moved to the left or right to correct sideways balance and then one of the six mounting holes can be used to correct the balance of the camera from being front or back heavy. The adaptor can be used either way round and the camera plate can also be re-positioned to the left or to the right, giving even more adjustment if required.

 

BASIC TRANSIT BAG
Product code BAG
Prices and more details at www.cameragrip.com

Suitable for Hague Jibs, Cranes, and Booms K1, K2, K8 & K10

This is our basic transit bag which is not padded, it is zipped at one end with plenty of room to place the varies parts in.
Approximate Size;- 135 x 18 x 13cm.  Colour;- Black

PADDED TRANSIT BAG
Product code CT46
Prices and more details at www.cameragrip.com

Suitable for Hague Jibs, Cranes, Booms K8, K9, K10, K12 & D3 Jib & Crane Dolly
The rigid padded transit bag has a heavy duty zip which runs along three sides of the bag, this enables the top of the bag to be lifted for easy access. Inside the bag is a unique pull-over protective fabric insert to securely wrap equipment within the case. There are internal tie-down straps to make sure equipment stays in place, end handles for easy carrying and a transport ID tag.
Specifications:
Internal Dimensions (W x D x H): 46 x 8 x 7.75 in. (116 x 20 x 19cm)
External Dimensions (W x D x H): 48 x 9.5 x 9 in. (122 x 24 x 22.5cm) Colour: Black
PADDED TRANSIT BAG
Product code CT49 
Prices and more details at www.cameragrip.com
Suitable for Hague Jibs, Cranes, Booms K9, K10, K12, K18 & D3 Jib & Crane Dolly

The rigid padded transit bag has a heavy duty zip which runs along three sides of the bag, this enables the top of the bag to be lifted for easy access. The interior features a reinforced support spine and end panels, pull-over protective fabric and tie-down straps, Exterior abrasion runners and heavy-duty bearing wheels provide smooth transport with ultimate protection. The grip handles offer easy carrying comfort.

Approximate Size;- 124 x 23 x 18cm. 49" x 9" x 7" Colour;- Black

SOFT PADDED TRANSIT BAG
Product code SBAG
Prices and more details at www.cameragrip.com

Suitable for Hague Jibs, Cranes, Booms K14, K16 & D5 Tripod Tracking Dolly

The soft padded transit bag has a zip which runs along three sides of the bag, this enables the top of the bag to be lifted for easy access. Inside are velcro straps for securing the items.

Approximate Size;- 155 x 18 x 18cm  Colour;- Navy Blue

CT577 QUICK RELEASE ADAPTOR
Product Code CT577
Prices and more details at www.cameragrip.com

Ideal for Hague Jibs, Cranes & Booms K2, K8 and K16
Features: * Camera plate includes 1/4"-20 and 3/8"-16 screws. * Sliding adaptor plate includes a built-in, spring-loaded, camera alignment pin. * Push-button safety lock prevents accidental release of adaptor plate.
Total Size 90 x 75 x 23mm. high. Camera Plate Size 90 x 40 x 12mm with both 3/8" and 1/4" camera screws with sprung video pin. The base plate has both 1/4" and 3/8" mounting threaded holes in the base.
The CT577 Quick Release Adaptor's camera plate is compatible with Manfrotto Video Heads 501/503/504/519/701/500/502/509, plus all heads using this sized camera plate.

Includes CT501 Camera Plate
MONITORS, MONITOR BRACKETS, and CAMERA CONTROL  
Prices and more details at www.cameragrip.com 

Please check out our range of Monitors and Monitor Brackets  
plus our range of  Remote Camera Controls

 

RETURN TO MAIN MENU

 

HOW TO ORDER


Phone Ha
gue Distribution on  +44 (0)115 9599028
or buy online from www.cameragrip.com
 

  

 B. Hague & Co. Ltd.
 Unit E2 Trent Park Trading Estate
 Little Tennis Street South
 Nottingham
 NG2 4EU

 Phone:  +44 (0)115 959 9028    
 E-mail: 
info@b-hague.co.uk

 
Hours of business

 Monday - Friday 8.00am. - 5.00pm.

 All our products are on display in our showroom.
 ( Viewing by appointment only - no children )
 Demonstrations -
A chance to see and try before you buy!
 

Oct 2014

RETURN TO MAIN MENU