|
|
Suction and Vacuum Mounts |
Buy online from www.cameragrip.co.uk
| SM1 |
CAMCORDER SUCTION MOUNT |
CAMCORDER
SUCTION MOUNT
Product code
SM1 £67.19 exc.vat £78.95 inc.vat

Ideal for
mounting a camcorder onto a car windscreen!
As
used on Channel 4's "Driven"
Fully
adjustable! Great for track days!
|
This mount has been specifically designed by Hague for mounting a lightweight camcorder onto a vehicle, whether inside or out. It is ideal for use on the windscreen or back window!
The
Camcorder Suction Mount can be attached to any non-porous surface, which makes it ideal
for mounting the camcorder onto a vehicle whether inside or out. The camcorder fastens to a reversible camera plate, which enables the camera to be mounted above or below the suction mount. This makes it ideal for use on a car windscreen, the camera can be positioned to look through the windscreen or into the vehicle. A fully adjustable double ball bracket has a single lever for locking the camera into the required position.
It's
ideal for Mini DV cams and all types of handheld Camcorders up to 1.5kg. |
The kit includes:- Suction pad, Double ball bracket, Extension arm
( for larger cameras ),
and Camera plate.
Suitable
for Mini DV cams & all types of handheld Camcorders up to 1.5kg.
Suction pad diameter 150mm. (pump action vacuum)
|
CAMCORDER
MOUNTING KIT
CMK
£83.41 exc.vat £98.00 inc.vat |
|
| SM2 |
CAMCORDER SUCTION PAD |
CAMCORDER
SUCTION PAD
Product code
SM2
£34.00 exc.vat £39.95 inc.vat
![]() |
The
Camcorder Suction Pad can be attached to any non-porous surface
such as glass, marble, metal, plastic. It can be fixed
either vertically or horizontally, a crank lever creates the vacuum which holds
the mount in place. An adjustable ball-socket head enables the camcorder to
be mounted in the required position. |
| SM3 |
PRO-SUCTION MOUNT |
PRO
- SUCTION MOUNT
Product code
SM3 £340.38 exc.vat
£399.95 inc.vat
|
Ideal for mounting a camcorder onto a vehicle
Fully
adjustable Can be mounted either horizontally or vertically
Three
suction pads for extra stability
Quick
release camera plate 100mm. Claw-ball leveller
Supports
up to 10kg.
Ideal
for Canon XL1/XM1/2, Sony VX2000/PD150/170,
PDX10, The
Pro - Suction Mount has 3 suction pads which can be attached to any
horizontal or vertical, non-porous flat surface. There are 3 adjustable brackets
on the suction pads and 3 on the triangle plate, with a selection of
connecting poles of different lengths so the mount can be used in a variety
of positions. The triangle plate has a 100mm. bowl with a quick release
slide plate mounted on a claw-ball leveller, making it quick and simple to
set the camera to the required position. A video head could be used on the
mount if required. |
|
![]() |
Kit includes:- 3 Suction pads (150mm. diameter, pump action vacuum) 1 - Triangle plate with 100mm. bowl 1 - Quick release slide plate with claw-ball leveler 6 - Adjustable brackets 3 - Connecting poles 250mm. long 2 - Connecting poles 500mm. long 1 - Connecting poles 700mm. long |
![]() |
Optional:-
100mm. claw-ball for Manfrotto video heads, Stepper ring 100mm. to 75mm. for
video heads with a 75mm. claw-ball, Extra connecting poles,
| SM4 |
DOUBLE SUCTION MOUNT |
DOUBLE SUCTION MOUNT
Product code
SM4 £144.64 exc.vat £169.95 inc.vat
As
used on BBC's "Top Gear"
![]() |
Ideal for mounting a camcorder onto a vehicle
Fully
adjustable Can be mounted either horizontally or vertically
Two
suction pads for extra stability
Large
camera plate
Supports
up to 3kg. |
|
Ideal for Canon XM1/2, Sony VX2000 PD150/170, PDX10, JVC GY-DV300 Streamcorder, Panasonic AG-DVX100 and all handheld camcorders!
![]() |
The Double Suction Mount has two strong suction pads, which can be attached to any flat non-porous surface, these give the camera mount extra stability. It has a large camera plate which supports the camera over a greater area preventing any movement in the camera's plastic casing. A double ball bracket, along with the tubular structure, enable the camera to be mounted in a variety of positions. It’s ideal for mounting a camera either outside or inside a vehicle, or on glass windows, or any flat non-porous surface. | ![]() |
![]() |
|
![]() |
Suitable for Mini DV cams & all types of handheld Camcorders up to 3kg. Suction pad diameter 150mm. (pump action vacuum)
| SM5 |
WINDOW SUCTION MOUNT |
![]() |
WINDOW
SUCTION MOUNT
Fully
adjustable Enables the camera to film through the
windscreen, side window or into the vehicle. Attaches to most non-porous
surfaces. Incorporates a separate removable telescopic brace that is designed to go
down to the car floor for added stability. Suitable for use inside only on
a moving vehicle. |
| SM6 |
MULTIPOD |
|
MULTIPOD |
The MULTIPOD makes video filming even more exciting. Film
scenes in which the camera rides along as a passenger are always very
impressive. In a car, ship, train or coach or from a small plane, mobile
camera shots add on intriguing angle to any video film. MULTIPOD ensures
that the camera remains absolutely stable. Operation is as easy as pie:
pull out the main leg to the required height, fold out the supporting
struts with their integrated suction caps and tightly secure to the
windscreen or a smooth surface. Can also be used as a monopod. |
| SM7 |
SUCTION CAMERA MOUNT |
|
SUCTION
CAMERA MOUNT |
The Suction Camera Mount can be attached to any non-porous surface such as glass, metal, plastic. It has two adjustable arms between the suction pad and the large camera plate, which has various holes for mounting the camera. It can be fixed to a car's windscreen, side windows or on the outside of the vehicle. A flat surface is required for the suction pad, which has a crank lever to create the vacuum to hold the mount in place. It's ideal for all types of small cameras up to 1.5kg. |
![]() |
Suitable for Mini DV cams & all types of handheld Camcorders up to 1.5kg. Suction pad diameter 100mm. (crank lever vacuum)
| SM8KIT |
SUCTION MOUNT KIT |
![]() |
SUCTION MOUNT KIT
Fully
adjustable
Can
be mounted either
Three
suction pads |
![]() |
Supports
up to 6kg.
This suction mount can be used in a variety of ways to mount a camcorder or stills camera almost anywhere onto a vehicle. It consists of several interchangeable parts which can all be purchased separately.
We are often asked by still photographers to be able to mount a camera further out away from the vehicle looking along the side or looking back at it. With the versatility of this suction mount kit, a variety of options are available (see pictures). If a camcorder is mounted to the rig you are able to create some very unusual shots. With this system you are able to add additional accessories such as the a superclamp & double ball tilt head which enables you to use both suction pads and superclamps to attach to a roll bar or roof rail for extra support.
Recommend for camcorders and cameras up to 6kg.
![]() |
The
SM8KIT Suction Mount Kit consists of: |
![]() |
Additional Suction Pads, Superclamps, Connecting Rods, Rod Clamps etc. can be added for extra support or to create a ridged construction to meet all your shooting requirements.
The suction pads can be used on any non porous surface, or using superclamps your camera can be fastened to scaffolding towers etc. This versatile kit enables a camera to be mounted in a variety of situations where it would be impossible to use a tripod.
![]() |
|
![]() |
|
CODE |
Optional Accessories PRODUCT |
PRICE exc.vat |
PRICE inc.vat |
| SM8 | Suction Pad | £51.02 | £59.95 |
| RC | Rod Clamp | £19.53 | £22.95 |
| R1000 | Connecting Rod 1000mm long | £16.98 | £19.95 |
| R500 | Connecting Rod 500mm long | £14.43 | £16.95 |
| R250 | Connecting Rod 250mm long | £12.72 | £14.95 |
| R125 | Connecting Rod 125mm long | £11.02 | £12.95 |
| SM8BH | Ball Head | £30.98 | £36.40 |
| LCP | Large Camera Plate | £14.43 | £16.95 |
| CC | Connecting Collar | £10.00 | £11.75 |
| SC | Superclamp | £14.89 | £17.50 |
| DB | Double Ball Tilt Head | £30.98 | £36.40 |
| SM9 |
MINI SUCTION POD |
|
MINI
SUCTION POD
Features:- |
The Mini Suction Pod is the ideal support for bullet/tube cameras, phones with integrated cameras, PDAs, digital cameras and lightweight camcorders. A special clamp, which can be screwed on the ball and socket head, is supplied for cameras without a tripod thread. The ball and socket head with a 1/4" thread and quick coupling system is fully adjustable. The suction cup sticks on any smooth non-porous surface and is locked with a thumb wheel. The black and transparent housing underlines the trendy look.
|
![]()
|
| SM10 |
BALL HEAD with SUCTION FOOT |
![]() |
BALL HEAD with
SUCTION FOOT Product code SM10 £13.57 exc.vat £15.95 inc.vat plus £2.50 UK Postage The Mini Ball Head with Suction Foot is the ideal support for bullet/tube cameras, lightweight camcorders, LCD screens, digital cameras, microphones, etc. Supports up to
500g. Thread size ¼",
|
![]() |
| SM11 |
TELESCOPIC SUCTION MOUNT |
|
TELESCOPIC
SUCTION MOUNT Product code SM11 £221.23 exc.vat £259.95 inc.vat NOT RECOMMENDED FOR CAMCORDERS
The Telescopic
Suction
Mount allows a stills camera to be mounted away from the
vehicle to create some very unusual shots. At it's longest length it is not
as rigid as our other mounts, so the vehicle should only be moved slowly and
must be on a smooth surface, otherwise camera shake will occur. |
![]() |
![]() |
Supports up to
2kg. Telescopic Column - Minimum length 110cm. Maximum total length 188cm. The column can be locked at the required length. Suction pad diameter 150mm. (pump action vacuum)
|
![]() |
| AB |
ANGLE BRACKET |
![]()
|
ANGLE BRACKET Product code AB £5.06 exc.vat £5.95 inc.vat plus £2.95 UK Postage The Angle Bracket is to support "bullet/tube type" cameras that have the mounting hole in the end. If you are using a suction mount on a windscreen and you need to mount the camera so it is pointing forward it is not possible to level off this type of camera. By using the Angle Bracket the camera is held by a camera screw on the end and there is a 1/4" hole to attach the bracket to the suction pad or tripod enabling you to get the required angle. Supports "bullet/tube
type"
cameras with 1/4" mounting hole in the end. |
![]()
|
| SUCTION MOUNTS and ACCESSORIES | |
![]() |
SUCTION MOUNT
- SM Product code SM £45.00 exc.vat £52.88 inc.vat 150mm. Pump Cup with 16mm. / 5/8" sockets and locking screw. |
![]() |
SUCTION MOUNT
- 241/SM8 Product code 241 £51.02 exc.vat £59.95 inc.vat 150mm. Pump Cup with swivel ball leveller and 16mm. / 5/8" socket with locking screw. |
![]() |
SUCTION MOUNT
- 241FB Product code 241FB £63.83 exc.vat £75.00 inc.vat 150mm. Pump Cup with flat base - The 60 mm. diameter disc with a 3/8" W male thread is built into the pump cup and enables you to mount most of Manfrotto’s flat-base heads or ball levelling heads. |
![]() |
CAMERA PLATE ADAPTOR for Oregon Action Cam ATC2K Product code 2K £9.32 exc.vat £10.95 inc.vat Enables the Oregon Action Cam ATC2K to be fastened to a standard tripod or any of our mounts that use the 1/4" fixing screw. |
Buy online from www.cameragrip.co.uk
|
HOW TO ORDER |
|
PAYMENT
- We accept VISA,
MASTERCARD, DELTA,
SWITCH & CONNECT CARDS, or
CHEQUES in Sterling. US DOLLARS
and EUROS |
|
B. Hague
& Co. Ltd. Phone: +44 (0)115
987 0031 |
Hours of business Monday - Thursday 8.00am. - 5.00pm. All our products are on display in our
showroom. |
ALL WEIGHTS & SIZES ARE APPROXIMATE
UK VAT @ 17.5%
May 2008