Camera Mounting Brackets
Our range of camera mounting brackets include 

Headrest Mount, Vehicle Mounts, Clamps, Wall Brackets, Hide Clamps, Ladder Mounts, Supports & Accessories

 
All these products can be purchased online from www.cameragrip.co.uk
 

HAGUE CAMCORDER HEADREST MOUNT
Product code CHM   £42.50 exc.vat  £51.00 inc.vat 

Camcorder mounts to the vehicle's headrest!
Super shots from inside the car ! Ideal for track days! Suitable for all small camcorders Supports up to 2kg.

MORE DETAILS   Buy online from www.cameragrip.co.uk

MANFROTTO WINDOW POD with BALL LEVELLER
Product code
WP
Prices and more details at www.cameragrip.co.uk 

 

The Window Pod attaches to the side windows of vehicles or narrow sills. It has a ball levelling head and is suitable for small camcorders, still cameras and spotting scopes.

Suitable for cameras & all types of small handheld Camcorders up to 1.2kg.

CAR WINDOW MOUNT with 2 WAY PAN & TILT HEAD
Product code
WM40502
Prices and more details at www.cameragrip.co.uk   
Car Window Mount
* 2-way one lever operated panhead with integral 1/4” thread
* Maximum panning height 80mm
* Protective rubber jaw pads
* Optional quick release plate & shoe
* Dim (mm) 205x60x85
* Weight 555g
VANGUARD WINDOW CLAMP with 3 WAY PAN & TILT HEAD
Product code
PH222 
Prices and more details at www.cameragrip.co.uk  

All the advantages of a fully specified tripod, but used from within a parked vehicle! Just attach the clamp  to the car window and enjoy the use of the 3 way pan and tilt head with quick release shoe from the safety of your vehicle, which becomes your mobile hide.
Specification Quick Release Camera Plate,  Turns 360 degrees &  3-way Panning.  Weight 0.622kg.   Maximum load 2kg.  Panhead movements Swivel: 360°.   Tilt: +90° ~ -60° & 0°~+90°

MORE DETAILS

VANGUARD WINDOW CLAMP with BALL LEVELLING HEAD
Product code
PH240
Prices and more details at www.cameragrip.co.uk

Capture the moment no matter the location. No tripod? No problem. PH window mounts have unique bases and non-slip platforms. They easily attach to vehicle windows, tripods, fences, tree branches, tubular structures and others, enabling steady use of cameras, camcorders or spotting scopes for effortless panning. PH-240 has an attached compact ball head with quick release platform and dual bubble levels. Its v-grooved clamp provides ultra secure attachment to tubes and tripods legs. PH-240 also has a side clamp locking dial.

MORE DETAILS  
 

HELMET MOUNT with QUICK RELEASE CAMERA PLATE
Product code HM  £25.50 exc.vat  £30.60 inc.vat

The Helmet Mount enables you to mount a lightweight camcorder, or bullet camera, to a helmet.

MORE DETAILS   Buy online from www.cameragrip.co.uk

HAGUE VELCRO MOUNT with BALL LEVELLING HEAD
Product code HVM  £25.50 exc.vat  £30.60 inc.vat  

The Hague Velcro Mount enables you to mount a lightweight camera, camcorder, or bullet camera, to any clean smooth surface, such as a  helmet, snowboard, skateboard, boat, dashboard, table, cupboard etc.
Only suitable for lightweight cameras.

MORE DETAILS   Buy online from www.cameragrip.co.uk

CAPTA PHONE MOUNT
Product code CAPTA 
Prices and more details at www.cameragrip.co.uk

Capta is a hybrid accessory for smartphones that combines the features of a tripod mount, a phone stand, and a cable management system into a simple elegant design small enough to carry everywhere you go.

MORE DETAILS
 

HAGUE UNIVERSAL PHONE MOUNT
Product code UPM  £20.00 exc.vat  £24.00 inc.vat

The Hague Universal Phone Mount has been designed to hold most types of modern, slim smart phones in a horizontal position. It enables the phone to be mounted to a tripod or any other mount that uses the standard 1/4" camera screw.
With these smart phones having such good cameras in them, with the facility of being able to record good quality video, it makes sense to be able to mount them to a tripod or other mount, to hold the phone steady. The mount has two V shaped sections that hold the phone in a horizontal position.

MORE DETAILS   Buy online from www.cameragrip.co.uk

i-Mount for the i-Phone
Product code i-MT 3G  
Product code i-MT 4   £21.50 exc.vat  £25.80 inc.vat 

The i-Mount enables the i-Phone 3G or 4 to be mounted to a tripod, monopod or any mount with the standard !/4" camera screw. This gives much steadier results when using the camera or video camera function available on the i-phone.
The phone simply clips securely into the mount, in the base of the mount is a standard 1/4" hole.
Approx size:- H90xW118xD38mm. Weight:- 60g. Colour:- Black.

MORE DETAILS

HAGUE UNIVERSAL TABLET MOUNT
Product code UTM  £25.00 exc.vat  £30.00 inc.vat

The Hague Universal Tablet Mount has been designed to hold most types of modern, slim tablets in a horizontal position. It enables the tablet to be mounted to a tripod or any other mount that uses the standard 1/4" camera screw.
The mount has two V shaped sections that hold the tablet in a horizontal position. The Universal Tablet Mount is not plastic; it's made of machined aluminium with a thumb screw for adjustment. Colour black.

MORE DETAILS   Buy online from www.cameragrip.co.uk

i-Pad Mount for the Apple i-Pad
Product code i-PMT   £45.00 exc.vat  £54.00 inc.vat 

The i-Pad Mount enables the Apple i-Pad to be mounted to a tripod, ballhead, clamp, bracket, etc. or any mount with a standard 1/4" camera screw or a 5/8" stud.
The i-Pad simply clips securely into the mount. In the base of the mount is a standard 1/4" hole, and on the back there is 5/8" / 16mm socket which is compatible with magic arms or any mount that has a 5/8" 16mm stud. The mount can be used either vertically or horizontally.

MORE DETAILS

SUPERCLAMP with BALL LEVELLER
Product code SC1   £40.00 exc.vat  £48.00 inc.vat

The Superclamp with Ball Leveller secures the Camcorder to any pole, tube, bench or table. Its jaws will attach to anything between 12 to 55mm in width. It can be fixed either vertically or horizontally. The Camera attaches to a ball levelling head making it ideal for small cameras and camcorders up to 1.5kg.

Supports up to 1.5kg.

Buy online from www.cameragrip.co.uk



SUPERCLAMP with DOUBLE BALL TILT HEAD
Product code SC2
Prices and more details at www.cameragrip.co.uk

The Superclamp & Double Ball Tilt Head can be attached to any pole, tube, bench or table. Its jaws will attach to anything between 12 to 55mm in width. It can be fixed either vertically or horizontally. The Double Ball Tilt Head with a reversible camera plate can be set at any angle or direction with a single lever for locking. It's ideal for Mini DV cams and all types of handheld Camcorders up to 3kg.

MORE DETAILS   Buy online from www.cameragrip.co.uk



CAMCORDER MOUNTING KIT
Product code CMK
Prices and more details at www.cameragrip.co.uk

The mounting kit enables you use a suction pad or a superclamp to attach the camera to any non-porous surface or to clamp it to any pole, tube, bench or table.
Kit includes:- Superclamp, Double Ball Bracket, Camera Plate, Extension Arm & Suction Pad

SUPERCLAMP with MAGIC ARM
Product code
SC3
Prices and more details at www.cameragrip.co.uk

The Superclamp & Variable Friction/Magic Arm  can be attached to any pole, tube, bench or table. Its jaws will attach to anything between 12 to 55mm in width. It can be fixed either vertically or horizontally. The Magic Arm with reversible camera plate extends to 53cm.and can be set at any angle or direction. One handwheel locks all three pivot points.  It's ideal for mounting a camcorder in those awkward positions. Supports up to 3kg.



MANFROTTO SNAKE ARM with SUPERCLAMP
Product code
MA050ASC
MANFROTTO SNAKE ARM (without Superclamp)
Product code
MA050A
Prices and more details at www.cameragrip.co.uk

Manfrotto Snake Arm
The snake arm is designed to hold a light fixture or camera in place, in a variety of situations. It will delight pro photographers, amateurs and videographers thanks to its flexibility, lightness and compactness.

HEAVY DUTY FLEX ARM with SUPERCLAMP & CAMERA PLATE
Product code 237KIT
Prices and more details at www.cameragrip.co.uk
 

The kit includes a Superclamp, a heavy duty flexible arm and a camera plate.
Ideal for lightweight camcorders or a LCD monitor.
Supports up to 1kg.
MEDIUM HYDROSTAT ARM with SUPERCLAMP & CAMERA PLATE
Product code 823KIT
Prices and more details at www.cameragrip.co.uk

This fully adjustable arm features 2 x 5/8”male studs and will support larger and heavier items. One of the two studs is hex shaped to fit perfectly with the superclamp. The camera plate can be fastened to the other end of the arm. With a total length of 23,5 cm, the 823 is ideal to position lighting fixtures or cameras virtually anywhere. All pivot points are locked by a single handwheel.

SMALL HYDROSTAT ARM with NANO CLAMP
Product code 819-1KIT
Prices and more details at www.cameragrip.co.uk

This arm spans 18cm and can support up to 2.2 Kg. It is ideal for attaching a video monitor or lightweight camera. The arms pivoting pins are 1/4" and 3/8" threaded with one side offering a platform to provide a larger footprint for the equipment being supported by the arm.  All pivot points are locked by a single handwheel and is supplied with a Nano clamp

MINI HYDROSTAT ARM with NANO CLAMP
Product code 814-1KIT 
Prices and more details at www.cameragrip.co.uk

The shortest arm at 13cm. is also the most powerful. The pivoting pin is threaded with 1/4" and 3/8" studs so it can be attached to the top of a pro video camera to support a small monitor or other video accessory with an exceptional load of 3.5kg. with one side offering a platform to provide a larger footprint for the equipment being supported by the arm.  All pivot points are locked by a single handwheel and is supplied with a Nano clamp

ARTICULATING ARM with HOT SHOE  ADAPTOR and a MANFROTTO NANO
Product code LAAKIT
Prices and more details at www.cameragrip.co.uk

KIT includes:-  Arm, Shoe Adaptor a Manfrotto Nano Clamp
The Articulating Arm is ideal when used with the Nano Clamp or the Hot Shoe Adaptor to mount a monitor, sound recorder or other accessory to a tripod leg or the shoe of the camera. If the Arm is attached to the Nano Clamp it can be used to fasten a small camera to cycle, pole, table edge, etc.
The Arm will support up to 1kg. It has 1/4-20 studs on both ends. All pivot points are locked by a single handwheel.

BAR CLAMP with BALL TILT HEAD  
Product code BCBL   £38.00 exc.vat  £45.60 inc.vat

The Bar Clamp with Ball Tilt Head can be attached to any pole, tube etc. between 12mm to 25 mm, this makes it ideal to attach a camera to a bike's handlebars or similar. The clamp has a 16mm socket for the ball tilt head's spindle which extends 65mm. giving the camera plenty of room for adjustment. It can be fixed either vertically or horizontally.  

MORE DETAILS   Buy online from www.cameragrip.co.uk

TUBE CLAMP with DOUBLE BALL TILT HEAD
Product code
TC
Prices and more details at www.cameragrip.co.uk

IDEAL FOR MOUNTING A CAMERA TO A BIKE!
The Tube Clamp with Double Ball Tilt Head is supplied with two U-Bolts and is suitable for attaching to round tubes, bars and railings with diameters between 15 - 30mm. ( 5/8" - 1 1/4" ).     
The zinc coated u-bolt rail base consists of the 25mm ( 1" ) diameter ball and an adjustable socket system with a large 50mm diameter camera plate with a standard 1/4"-20 camera thread, a 50mm washer is also supplied to place between the camera and the mount. This mount is designed to be a universal mounting solution for both still and movie cameras and can be adjusted to get the camera into the required position. The distance from camera to rail can be adjusted from 60 to 150mm ( 1 3/8" - 6" )

NANO CLAMP with BALL TILT HEAD
Product code
NCBL
Prices and more details at www.cameragrip.co.uk

The Nano Clamp with Ball Tilt Head can be attached to any pole or tube between 13mm to 35 mm. or onto a table edge between 3mm & 21mm. This makes it ideal to attach a camera to a bike's handlebars, rails etc. It can also be used as attach a monitor to a tripod or handle of a pro-camcorder.
Supports up to 1.5kg.

HAMA BIKE POD
Product code
H4372
Prices and more details at www.cameragrip.co.uk

Ideal for lightweight camcorders and cameras – Supports up to 800g.
Your camera or video camera fastens directly onto the ball levelling head of the Bike pod and is locked into position. The Bike Pod can be attached to the handlebars or onto rods, railings, etc.
Bike Pod and Clamp - Ideal for action films or movies - The special holder can be mounted on all profiles with a diameter of up to 3 cm. - With special fastener for extra secure hold (similar to a cable tie but removable). - With ball head for adjusting the camera. - Thread: 1/4". - Weight: 40g.

Hama Bike Holder for Apple iPhone 4
Product Code 106620
Prices and more details at www.cameragrip.co.uk

Hama Bike Holder for Apple iPhone 4
The phone holder enables the i-Phone4 to be mounted to a bicycle.
Features - 360° ball joint for optimal positioning and an ideal viewing angle, e.g. when using the iPhone as navigation device. - Secure locking mechanism. - Mounting of the holder by means of a locking clamp.
Colour: Black. For Mobile Phone Brand: Apple I Phone 4/4S. Material: Plastic.

FLYMOUNT all weather CAMERA MOUNT
Product code FLY
 
Prices and more details at www.cameragrip.co.uk

The New Flymount is a Unique Waterproof Camera Mount for Action Sports. Ideal for windsurfing, BMX, go-karts, motorcycling, sailing, motor sports, quads, freeskiing, cycling, sled, dirt bikes, kayaking, mountain biking, hang glider, road bike, jet ski etc.
Ultra strong, compact and light weight; the Flymount is perfect for use on mountain bikes, windsurf rigs, sail boats, quads and so on.. Made from high grade glass reinforced nylon and stainless steel, the Flymount will not deteriorate in salt water, neither will it suffer under impact.

UNIVERSAL CLAMP with BALL TILT HEAD  
Product code UC
Prices and more details at www.cameragrip.co.uk

The Universal Clamp with Ball Tilt Head can be attached to any pole, tube, bench or irregular shaped object. It will attach to anything up to 80mm. in width and has a telescopic spindle which extends 115mm. giving the camera plenty of room for adjustment. It can be fixed either vertically or horizontally.  

The Ball Tilt Head can be set at any angle or direction and has a handwheel for locking. It's ideal for Mini DV cams and all types of handheld Camcorders up to 2kg.



CLAMP WITH TELESCOPIC BALL HEAD  
Product code C2
Prices and more details at www.cameragrip.co.uk

The Clamp attaches to a table edge, beam or bar. A spindle goes through the clamp enabling the height with a ball levelling head to be adjusted. It's an ideal for both cameras and camcorders.

Supports up to 2kg.  The clamp can fixed to any solid surfaces or bars up to 30mm wide. The ball head height is adjustable from 80mm to 210mm. Size 22 x 8 x 6cm. Weight 1.2kg.
VANGUARD HIDE CLAMP WITH PAN & TILT HEAD  
Product code VS92 
Prices and more details at www.cameragrip.co.uk

The Vanguard VS-92 Hide Clamp - Fitted with a pan and tilt head making it an ideal camera platform in places where it would be difficult or impossible to use a tripod. The pan and tilt head can be removed from the column leaving a ball levelling head, which a camera could be directly mounted to. The ''G'' clamp at the base of the unit will enable it to be securely fixed to such items as a table edge, planks, posts, branches and car windows. Fitted with ball & socket at the base and a pan and tilt head at the top of the column, it is double jointed for maximum flexibility. The column is extendable, making it possible to reach those awkward places. The VS-91 is suitable for photography, macro photography, video photography and as a support for binoculars or spotting scope when bird watching. The VS-92 can be used with  compact cameras, SLR cameras, video cameras, spotting scopes etc.
UNIVERSAL MOUNT with 2 WAY PAN & TILT HEAD  
Product code UM40501
Prices and more details at www.cameragrip.co.uk

Universal Mount - Designed to clamp horizontally or vertically onto a wide range of objects.
* 2-way one lever operated panhead with integral 1/4” thread
* Maximum panning height 80mm
* Maximum jaw width 45mm
* Optional quick release plate & shoe
* Dim (mm) 210x60x70
* Weight 597g
UNIVERSAL II HIDE MOUNT with 2 WAY PAN & TILT HEAD  
Product code UH40503
Prices and more details at www.cameragrip.co.uk

Lightweight aluminium bench clamp with 400mm extension pole.
* 2-way one lever operated panhead with integral 1/4” thread
* Maximum panning height 450mm
* Maximum jaw width 45mm
* Optional quick release plate & shoe
* Dim (mm) 450x60x95
* Weight 845g.
BC-2 HIDE CLAMP with 3 WAY PAN & TILT HEAD  
Product code BC42605
Prices and more details at www.cameragrip.co.uk

BC-2 Hide Clamp with head
Lightweight & rigid bench clamp support specially designed for use with fieldscopes, photo & video equipment.
Features include: * 3-way magnesium panhead with 360º panning and +90º to -60º tilt plus 90º side tilt
* Integral QR plate with 1/4” thread and removable locking pin. * QR plate side locking screw for extra rigidity. * 500mm sliding centre column adjustment. * Maximum jaw width 45mm. * Maximum height extended 510mm (20”). * Minimum height retracted 90mm (3 1/2”). * Weight 960g
BC-2 CLAMP with 500mm CENTRE COLUMN  
Product code BC42610
Prices and more details at www.cameragrip.co.uk

BC-2 Clamp & 500mm centre column enables you to attach your own Pan & Tilt Head or Ball Levelling Head to the column.
The clamp has a column lock and a maximum jaw width 45mm
Weight 436g.
BC-2 CLAMP
Product code BC42611
Prices and more details at www.cameragrip.co.uk

BC-2 Clamp enables you to use your own tripod's centre column to convert it into a hide clamp. The clamp has a column lock and a maximum jaw width 45mm.
The clamp is supplied complete with ø21/22mm, 23/24mm and ø25/26mm reducer sleeves which cover most sizes of tripod centre columns. Please check the diameter of your centre column before ordering. Weight 267g.
COLUMN CLAMP  
Product code HC
Prices and more details at www.cameragrip.co.uk

Versatile Clamp designed to work in conjunction with removable tripod columns of between 24mm. to 28mm. diameter such as the Manfrotto 755,190 and 055 tripods.

The Column Clamp can be securely fixed to solid surfaces or bars up to 58mm. wide. The column with head (sold separately) is inserted into the clamp and locked in position at the required height.
The ideal accessory in hides for nature photography or support for binoculars and scopes.
MINI - CLAMP with BALL LEVELLING HEAD  
Product code
MC
Prices and more details at www.cameragrip.co.uk


The Mini-Clamp clamps to anything up to 38mm. in diameter It can be mounted either vertically or horizontally and has a ball & socket tilt head onto which the camcorder is mounted.

Suitable for all small Cameras up to 1kg.  
Weight:- 150 g. Size approx 100mm. x 100mm. x 45mm.

HAMA CLAMP and TABLE TRIPOD  
Product code
4001
Prices and more details at www.cameragrip.co.uk


Suitable for all small Cameras and monitors up to 1kg.  
Hama Clamp and Table Tripod with ball and socket head.
1/4" camera screw. Height 13cm. 2 screw-in legs. Opens to 3.5cm max. Weight 145g. Colour Black.

WALL BRACKET with BALL TILT HEAD
Product code WB1   £34.00 exc.vat  £40.80 inc.vat 
 
The wall bracket has 3 screw holes to fasten it to the wall or table. The ball tilt head is fully adjustable and supports a maximum camera weight of 2kg. 

Base diameter 90mm. with 3 screw holes. Distance from wall to camera screw 135mm.

Buy online from www.cameragrip.co.uk

WALL/CEILING MOUNT
with DOUBLE BALL BRACKET and REVERSIBLE CAMERA PLATE

Product code WB2
Prices and more details at www.cameragrip.co.uk

The mount can be screwed to a ceiling, wall or table. The double ball bracket is fully adjustable with a single lever for locking. A reversible camera plate with extension spindle enables the camera to be mounted above or below the fixing point. Supports up to 3kg.
Base diameter 90mm. with 3 screw holes. Distance from wall to camera screw 50 to190mm.


WALL/CEILING MOUNT
with MAGIC ARM  and a REVERSIBLE CAMERA PLATE

Product code WB3
Prices and more details at www.cameragrip.co.uk
 
 
The mount can be screwed to a ceiling, wall or table. The magic arm extends up to 53cm. away from the fixing point and is fully adjustable in all directions, with a single handwheel for locking it in position. The reversible camera plate enables the camera to be mounted above or below the arm. Supports up to 2kg.
Base diameter 90mm. with 3 screw holes. Distance from wall to camera screw 50 to 575mm


WALL BRACKET with BALL TILT HEAD
Product code WB4   £25.50 exc.vat  £30.60 inc.vat 
  
The wall bracket has 2 screw holes to fasten it to the wall or table. The bracket allows cable access from it's base, through the length of the bracket, to the camera fixing plate. The ball tilt head is fully adjustable and supports a maximum camera weight of 2kg. 

Base diameter 110mm. with 2 screw holes. Distance from wall to camera screw 110mm

Buy online from www.cameragrip.co.uk

WALL BRACKET with TILT HEAD
Product code WB5
Prices and more details at www.cameragrip.co.uk

This L shaped wall bracket has 2 screw holes to fasten it to the wall, it is adjustable sideways and tilts up and down. A standard 1/4 screw attaches the camera to the mount and it supports up to 4kg. 

Size 130mm. x 240mm. x 25mm wide. Distance from wall to camera screw 230mm.

WOODSCREW with BALL TILT HEAD
Product code C1005
Prices and more details at www.cameragrip.co.uk

The Woodscrew can be screwed into beams, fence posts, tree stumps etc. A ball tilt head is also supplied to mount the camera or camcorder and is fully adjustable for positioning the camera.

Ball Tilt Head - suitable for Photo or Video Cameras and small LCD monitors. Supports up to 1.5kg.

GROUND SPIKE with BALL TILT HEAD
Product code C1006
Prices and more details at www.cameragrip.co.uk

The Ground Spike with Ball Tilt Head is ideal for cameras and small camcorders. It can be pushed into the ground, sand, earth, pebbles, snow etc. The ground spike is supplied with a ball-and-socket head.

Supports up to 1.5kg.
Manfrotto 100mm. HI-HAT
Product code 529B
Prices and more details at www.cameragrip.co.uk

Manfrotto's Hi-Hat enables you to get shots from a dog's perspective. The 529B has adjustable leg angles to mount the camera in the tightest or lowest of locations - and thanks to the built-in spreader you can simply use the 529B on any even surface. The feet are rubber-padded to protect delicate surfaces and have a hole so that the 529B can be screwed to a ladder, apple-box or a sheet of wood.

Hague LOW-HAT with a choice of a 100mm or 75mm bowl
Product code LH or LH75  £80.00 exc.vat  £96.00 inc.vat
 

Ideal for camera sliders, or mounting a tripod head to a table, bench, dolly etc. The Hague 100mm or 75mm Low-Hat enables you to get very low shots using your existing video head from your tripod. The bowl mount accepts most heads using this popular 100mm or 75mm levelling system. The Low-Hat has a 3/8” threaded hole in the centre of its base, making it easy to attach to a camera slider. It also has three evenly spaced mounting holes to secure it to a step ladder, apple-box, dolly or a sheet of wood.

MORE DETAILS   Buy online from www.cameragrip.co.uk

COLUMN BOWL MOUNT with CLAMPS
Product code CBM   £170.00 exc.vat  £204.00 inc.vat

The Column Bowl Mount has a 100mm. bowl onto which you can attach your video head. The mount has two columns that fasten to the column clamps which enable you to adjust the height of the head. It can be fastened to a table edge or horizontal beam up to 58mm in width.

MORE DETAILS   Buy online from www.cameragrip.co.uk



BOWL MOUNT with SUPERCLAMPS
with a choice of a 100mm or 75mm bowl

Product code BMS or BMS75  £85.00 exc.vat  £102.00 inc.vat

The Bowl Mount  attaches to any horizontal pole, roll bar, scaffolding, ladder run, table edge,  etc.
It is held in position by two superclamps, the jaws of the clamps will attach to a pipe/tube between 12 to 55mm in diameter or to a table/beam with a maximum width of 25mm.

MORE DETAILS   Buy online from www.cameragrip.co.uk



BOWL MOUNT with a choice of a 100mm or 75mm bowl
Product code BM or BM75   £67.00 exc.vat  £80.40 inc.vat

The Bowl Mount  attaches to any horizontal pole, roll bar, scaffolding, ladder run, table edge,  etc.
It is held in position by two superclamps (NOT SUPPLIED).

Buy online from www.cameragrip.co.uk

HAGUE MULTI-MOUNT SYSTEM
Product Code MMS

The Multi-Mount System enables a variety of interchangeable components from Hague and Manfrotto to be used in various ways to mount a camera in difficult positions, such as on vehicles, roll bars, scaffolding towers, railings, windows etc.
The Multi-Mount System is available as 3 different kits or all the parts are available as separate items.

MORE DETAILS   Buy online from www.cameragrip.co.uk

TWIN HEAD TRIPOD MOUNT
Product code THM  £102.00 exc.vat  £122.40 inc.vat

The TWIN HEAD TRIPOD MOUNT enables two video heads to be mounted to one tripod, making it ideal for a two camera shoot where space is limited. One operator can use one camera for a “wide shot” while using the main camera to follow the action. With both cameras being so close together the operator can use the flip out screens on the cameras to monitor both shots. This makes it ideal for stage shows, conferences, weddings etc.

MORE DETAILS   Buy online from www.cameragrip.co.uk

MANFROTTO TWIN HEAD TRIPOD MOUNT
Product code MTHM
Prices and more details at www.cameragrip.co.uk

The MANFROTTO TWIN HEAD MOUNT enables two video heads to be mounted to one tripod, making it ideal for a two camera shoot where space is limited. One operator can use one camera for a “wide shot” while using the main camera to follow the action. With both cameras being so close together the operator can use the flip out screens on the cameras to monitor both shots. This makes it ideal for stage shows, conferences, weddings etc.
The distance between the heads can be adjusted from 185mm to 445mm.

VANGUARD MULTI - MOUNT 6
Product code VMM6
Prices and more details at www.cameragrip.co.uk

The Vanguard Multi - Mount 6 enables the user to fix up to four pieces of equipment simultaneously to a  tripod, it attaches to the 3/8" stud at the top of the tripod. There are two adjustable mounts to attach your camera, spotting scope etc. On the ends of the adjustable horizontal column are two more fixed mounting platforms with 3/8" studs. It is supplied with a carrying case.

TWIN CAMERA MOUNT
Product code TCM  £23.00 exc.vat  £27.60 inc.vat

  As seen on Channel 5's Gadget Show

The TWIN CAMERA MOUNT enables you to mount two cameras side by side onto the head of a tripod. The distance between the two cameras can be adjusted from 250 to 80mm. A mounting hole in the centre of the mount enables it to be fastened to most tripod heads.

MORE DETAILS   Buy online from www.cameragrip.co.uk

HAGUE 3D STEREO CAMERA MOUNT
Product code 3DM  £111.00 exc.vat  £133.20 inc.vat
Ideal for both camcorders and DSLR cameras.

The Hague 3D Stereo camera mount enables two cameras to be mounted side by side. The distance between the two cameras can be adjusted, without having to remove the mount from the tripod. The mount allows the cameras to be adjusted from 315mm to 65mm apart, how close you can mount the cameras will depend on the width of the cameras used.

MORE DETAILS

BALANCE CORRECTION PLATE
Product code BCP   £13.00 exc.vat  £15.60 inc.vat 
Unfortunately not all camcorder manufacturers put the tripod mounting hole at the centre of balance on the camera, which means the camcorder could be front or back heavy, or the mounting hole could be offset to the side on the camcorder. Larger batteries or a wide angle lens will also affect balance. This can sometimes cause problems when the camera is mounted onto a support or tripod where it is preferred to have the camera equally balanced for stability. The Balance Correction Plate will correct this, it simply screws onto the base of the camcorder either pointing forward or back or to the side. There are then several mounting holes in the plate, choose one to correct the balance and then secure to the mount. SIZE L128 x W38 x 6mm. Buy online from www.cameragrip.co.uk
BALANCE CORRECTION ADAPTOR
Ideal for DSLR cameras

Product code BCA   £24.00 exc.vat  £28.80 inc.vat 
When mounting a camera to a ball head, video head, stabilizer, jib or crane, it helps if the camera's mounting hole is in the centre of balance. Unfortunately not all camcorder and camera manufacturers put the mounting hole at the centre of balance, which means the camera could be front or back heavy, or the mounting hole could be offset to the side. Larger batteries or interchangeable lenses will also affect the balance; this is particularly prevalent with Digital SLR cameras.
The Balance Correction Adaptor solves this problem, as the camera can be moved to the left or right to correct sideways balance and then one of the six mounting holes can be used to correct the balance of the camera from being front or back heavy. The adaptor can be used either way round and the camera plate can also be re-positioned to the left or to the right, giving even more adjustment if required.

MORE DETAILS

SUPERCLAMP
Product code
SC  
Prices and more details at www.cameragrip.co.uk

The Superclamp can be attached to any pole, tube, bench or table. Its jaws will attach to a pole between 12 to 55mm in width or table edge between 12 to 30mm. It can be fixed either vertically or horizontally and has a 16mm / 5/8" female socket.

SUPERCLAMP ANGLE BRACKET
Product code
SAB   £14.50 exc.vat  £17.40 inc.vat

The Superclamp Angle Bracket fastens to a Manfrotto Superclamp by the two supplied 5mm screws. There are several holes in the angle bracket to change the the angle at which it is mounted to the clamp. It can also be mounted to the clamp by using two other holes if it is to be used on the edge of a table. The bracket has a 3/8" stud to mount any of the Manfrotto ball heads, pan & tilt heads or quick release camera plate adaptors and is secured by the handwheel.

MORE DETAILS   Buy online from www.cameragrip.co.uk

CAMERA MOUNTING STUD M037
Product code M037
  
Prices and more details at www.cameragrip.co.uk

The M037 CAMERA MOUNTING STUD attaches into the Superclamps 5/8" socket.
Ideal to mount cameras, directly or with a camera head to the Superclamp. The stud has both 3/8" and 1/4" threads.
FULL TECHNICAL SPECIFICATIONS
Weight - 0.04 kg.  Material - brass. Attachment - 1/4" and 3/8" screws

HEAD MOUNTING ADAPTOR M208
Product code M208
  
Prices and more details at www.cameragrip.co.uk

The HEAD MOUNTING ADAPTOR allows a Manfrotto head to be fastened directly into a Superclamps 5/8" 16mm socket.
The adaptors 3/8" stud enables you mount a Ball Head or a Pan & Tilt Head to a Manfrotto Superclamp.
Diameter: - 59,5mm 

BARCLAMP
Product code
BC   £21.00 exc.vat  £25.20 inc.vat

 Can be attached to any pole, tube, etc.  It will attach to anything between 12 to 25mm in width. It can be fixed either vertically or horizontally. Has a 16mm / 5/8" socket.
Can be used with BL, ES, DB,DBRC.

Buy online from www.cameragrip.co.uk

NANO CLAMP M386BC
Product code
M386BC  
Prices and more details at www.cameragrip.co.uk

The new Nano Clamp is smaller than a Superclamp and can support a payload of 4kg.
Features; - a new patented unexposed thread system.- a new high friction tape which improves the grip. - high performance aluminium. - pull and lock aluminium handle. - unique surface design that was studied on the smallest surface able to grip round or flat tube/pole surface. The clamp comes with a 1/4" - 3/8" adaptor.
TECHNICAL SPECIFICATIONS:
Attachment (top) : 1/4 - 3/8 attachment type. Material : aluminium. Colour : black. Clamp range min round tube : 12 - 35mm. Weight : 0.11kg.

HOT SHOE ADAPTOR
Product code HSA
Prices and more details at www.cameragrip.co.uk

The Hot Shoe Adaptor can be used in several ways. One way is to attach a Short or Long Articulated Arm or other accessory with a 1/4" male screw to it. Another way is to remove the top of it so that it has a male 1/4" male screw  to which you can attach any accessory with  1/4"  female threads, such as external sound devices etc. directly to it

MINI HYDROSTAT ARM 814-1
Product code 814-1 
Prices and more details at www.cameragrip.co.uk

The shortest arm at 13cm. is also the most powerful. The pivoting pin is threaded with 1/4" and 3/8" studs so it can be attached to the top of a pro video camera to support a small monitor or other video accessory with an exceptional load of 3.5kg. with one side offering a platform to provide a larger footprint for the equipment being supported by the arm.  All pivot points are locked by a single handwheel.
SPECIFICATIONS
Weight – 0.2100kg.  Load capacity - 3.5kg.  Colour – black. Material – aluminium. Minimum length - 8mm.  Maximum length – 13cm. Attachment 1 - adjustable 1/4" screw. Attachment 2  3/8" screw.

SHORT ARTICULATING ARM
Product code SAA
Prices and more details at www.cameragrip.co.uk

The Short Articulating Arm is ideal when attached to a Superclamp, Nano Clamp or a Hot Shoe Adaptor to mount a monitor or other accessory to a tripod leg or the shoe of the camera. If the Arm is attached to a Superclamp or Nano Clamp it can be used to fasten a small camera to cycle, pole, table edge, etc.
The Arm will support up to 1.5kg. It has 1/4-20 studs on both ends. All pivot points are locked by a single handwheel.
Length (arms without threads): 4.2" (10.7 cm)
Weight: 0.34 lbs (156 grams)

SMALL HYDROSTAT ARM 819-1
Product code 819-1 
Prices and more details at www.cameragrip.co.uk

This arm spans 18cm and can support up to 2.2 Kg. The 819-1 is the ideal companion for attaching a video monitor to a camera or using as a flag support. The 819-1 pivoting pins are 1/4" and 3/8" threaded with one side offering a platform to provide a larger footprint for the equipment being supported by the arm.  All pivot points are locked by a single handwheel.
SPECIFICATIONS
Weight - 0.2200kg.  Load capacity - 2.2 kg.  Colour – black.  Material – aluminium. Minimum length - 25mm.   Maximum length – 180mm.  Attachment 1 - Adjustable 1/4" screw.  Attachment 2 - 3/8" screw 

ARTICULATING ARM
Product code LAA 
Prices and more details at www.cameragrip.co.uk

The Articulating Arm is ideal to mount a monitor, sound recorder or other accessory to the shoe of the camera. If the Arm is attached to a optional Manfrotto Nano Clamp it can be used to fasten a small camera to cycle, pole, table edge, etc.
The Arm will support up to 1kg. It has 1/4-20 studs on both ends. All pivot points are locked by a single handwheel.

HAGUE TRIPOD LEG CLAMP
Product code TLC1  £17.00 exc.vat  £20.40 inc.vat
Suitable for Manfrotto Tripod Legs  546/545/542/525/520/515/500. plus other tripods with twin leg top sections that are 90mm apart and are 14-16mm in diameter.

The clamp has a 1/4" threaded mounting hole to attach an optional articulated arm, this can be used to mount a monitor or other accessory to the tripod.
The clamp is fastened to the top section of a twin legged tripod and is held by 2 wing handwheels.
Suitable for
Articulating Arms LAA/SAA. Not suitable for Manfrotto Hydrostat Arms without a 3/8 to 1/4" conversion bush.
MEDIUM HYDROSTAT ARM 823
Product code 823 
Prices and more details at www.cameragrip.co.uk

This fully adjustable arm features 2 x 5/8”male studs and will support larger and heavier items. One of the two studs is hex shaped to fit perfectly with a superclamp. With a total length of 23,5 cm, the 823 is ideal to position lighting fixtures or cameras virtually anywhere. All pivot points are locked by a single handwheel.
SPECIFICATIONS 
Weight - 0.55kg.  Load capacity - 4kg.  Colour - black.  Material – aluminium. Minimum length - 14mm.  Maximum length  230mm.   Attachment - 5/8" male stud x 2.  Can be used with SC, WB, ES, SM

VARIABLE FRICTION / MAGIC ARM
Product code MA  
Prices and more details at www.cameragrip.co.uk
 
The magic arm extends up to 53cm. away from the fixing point and is fully adjustable in all directions, with a single handwheel for locking it in position. Has a 16mm / 5/8" spindle. Includes reversible camera plate.
Supports up to  3kg.
Can be used with SC, WB, ES, SM
VARIABLE FRICTION / MAGIC ARM
Product code MARC  
Prices and more details at www.cameragrip.co.uk

The magic arm with quick release camera plate extends up to 53cm. away from the fixing point and is fully adjustable in all directions, with a single handwheel for locking it in position. Has a 16mm / 5/8" spindle.
Supports up to  3kg.
Can be used with SC, WB, ES, SM
MINI ARTICULATED ARM with CAMERA PLATE
Product code M196B2  
Prices and more details at www.cameragrip.co.uk
 

The Mini Articulated Arm can be attached to a Superclamp (SC) or our Wall Bracket (WB), it is ideal to mount a lightweight camera or monitor. It supports up to  1.5kg. Each section is separately locked.  Maximum length 60cm.
HEAVY DUTY FLEX ARM
Product code M237HD  
Prices and more details at www.cameragrip.co.uk
 

Flexible arm, 55cm long with hexagon stud to fit Superclamp (SC) with 3/8" female thread and 16mm stud with 1/4" male thread.
It's ideal to mount a lightweight camera or monitor. It supports up to  0.5kg.
DOUBLE BALL TILT HEAD
Product code DB  
Prices and more details at www.cameragrip.co.uk
 

The Double Ball Tilt Head can be set at any angle or direction with a single lever for locking. Has a 16mm / 5/8" spindle. Includes reversible camera plate.
Can be used with SC, WB, ES, SM
SINGLE BALL TILT HEAD
Product code SM8BH
Prices and more details at www.cameragrip.co.uk
 

The Single Ball Tilt Head can positioned and locked by a single lever. It can be fastened to our 5/8" / 16mm connecting rods. Includes reversible camera plate. ( Rod not included ).

ROD CLAMP
Product code RC  

Prices and more details at www.cameragrip.co.uk


The Rod Clamp enables two connecting rods to be held together to either adjust the length of the two rods or change direction or to brace across the rods.

CONNECTING RODS
Product code
R1000  £17.00 exc.vat  £22.40 inc.vat 
Product code R500  £14.00 exc.vat  £16.80 inc.vat 
Product code
R250  £13.00 exc.vat  £15.60 inc.vat 
Product code
R125  £11.00 exc.vat  £13.20 inc.vat 

Connecting Rods Product Code R1000, R500, R250 or R125
The 5/8" / 16mm Connecting Rods are available at 4 different lengths from 125mm, 250mm, 500mm and 1000mm.

Buy online from www.cameragrip.co.uk

CONNECTING STUD
Product code
SCS
  £11.00 exc.vat  £13.20 inc.vat 


The Connecting Stud enables the Angle Bracket to be fastened to a Superclamp, or it can be used to join two Superclamps together.

Buy online from www.cameragrip.co.uk

HEAD MOUNT
Product code
HM38
  £42.50 exc.vat  £51.00 inc.vat 


The Head Mount is a triangle plate with a 3/8" threaded stud to attach a *Ball Levelling Head, *Pan & Tilt Head or a *Quick Release Adapter ( *sold separately ). At the corners of the triangle plate are 5/8" / 16mm male studs to attach the Angle Bracket.

Buy online from www.cameragrip.co.uk

100mm BOWL MOUNT
Product code
BM
100  £68.00 exc.vat  £81.60 inc.vat 


The 100mm Bowl Mount enables a *Pro-Pan & Tilt Head with a 100mm claw ball ( *sold separately ) to be fastened to the mount and has the facility to "level off" the head. At the corners of the triangle plate are 5/8" / 16mm male studs to attach the Angle Bracket AB58.

Buy online from www.cameragrip.co.uk

HAGUE 75mm BOWL
Product code
75B
  £25.00 exc.vat  £30.00 inc.vat 

The 75mm Bowl replaces the 100mm Bowl used on several of our products. This enables a Pan & Tilt Head with a 75mm levelling system to be used without the need of a stepper ring.

Suitable for our 100mm Bowl Mounts LH100, CBM, BMS, BM, THM, BM100.
Dollies HTD, D2, D7, D8.
Jibs K12, K14.

STEPPER RING
Product code
SR
  £19.00 exc.vat  £22.80 inc.vat 


The Stepper Ring enables a Pan & Tilt Head with a 75mm levelling system to be used on the 100mm Bowl Mount.

Buy online from www.cameragrip.co.uk

ANGLE BRACKET
Product code
AB58
 

Prices and more details at www.cameragrip.co.uk


The Angle Bracket has two 5/8" 16mm female sockets with locking handle.

MANFROTTO CAMERA PLATE with 16mm / 5/8" SOCKET
Product code MCP  
Prices and more details at www.cameragrip.co.uk

The Manfrotto spare camera plate has 2 - 16mm/5/8" sockets with locking screws, and a standard 1/4" camera screw to attach your camera etc.  Size 120mm x 30mm x 25mm.
Can be used with DB, MA, ES, 828.
LARGE CAMERA PLATE with 16mm / 5/8" SOCKET
Product code LCP   £16.00 exc.vat  £19.20 inc.vat
 

The large camera plate gives a greater seating area for the camera. It has a standard 1/4" camera screw and a 16mm / 5/8" socket with locking screw.  Size 100mm x 65mm x 55mm.
Can be used with DB, MA, ES.

Buy online from www.cameragrip.co.uk

DOUBLE BALL TILT HEAD
Product code DBRC  
Prices and more details at www.cameragrip.co.uk

The Double Ball Tilt Head with quick release camera plate can be set at any angle or direction with a single lever for locking. Has a 16mm / 5/8" spindle.
Can be used with SC, WB, ES, SM
BALL LEVELLING HEAD
Product code
BL   £21.50 exc.vat  £25.80 inc.vat

Ball levelling head with 16mm. / 5/8" spindle x 80mm. long.
Can be used with SC, WB, ES, SM

Buy online from www.cameragrip.co.uk

BALL LEVELLING HEAD with 5/8" SOCKET
Product code
BLS   £24.50 exc.vat  £29.40 inc.vat

Ideal for mounting a camera or monitor onto a lighting stand, or any mount with a 5/8" / 16mm spindle. The ball levelling head is fully adjustable with a standard 1/4" camera screw and the socket has a 5/8" /16mm hole x 26mm deep with locking screw.
Approximate Size:- Height 110mm. Width 36mm.

Buy online from www.cameragrip.co.uk
EXTENSION SPINDLE
Product code
ES   £13.00 exc.vat  £15.60 inc.vat

Extension spindle16mm. / 5/8" Male spindle to Female socket - Length 125mm.
Can be used with SC, WB, BL, DB, SM, DBRC, MARC  

Buy online from www.cameragrip.co.uk

CONNECTING COLLAR
Product code
CC   £11.00 exc.vat  £13.20 inc.vat  

The Connecting Collar enables two 5/8" / 16mm male studs to be held together, such as holding two connecting rods together. 

Buy online from www.cameragrip.co.uk

WALL BRACKET
Product code
WB   £20.00 exc.vat  £24.00 inc.vat

Wall bracket with 16mm. / 5/8" socket and locking screw. Wall plate diameter 90mm.
Can be used with BL, DB, MA, ES, MARC, DBRC

Buy online from www.cameragrip.co.uk

SUCTION MOUNT - 241
Product code
241  
Prices and more details at www.cameragrip.co.uk

The Suction Mount has a ball leveller with a 5/8" / 16mm female socket with locking screw.
150mm. Pump Cup.
SUCTION MOUNT - 241FB
Product code
241FB  
Prices and more details at www.cameragrip.co.uk

150mm. Pump Cup with flat base - The 60 mm. diameter disc with a 3/8" W male thread is built into the pump cup and enables you to mount most of Manfrotto’s flat-base heads or ball levelling heads.  
CAMERA PLATE ADAPTOR for Oregon Action Cam ATC2K
Product code
2K   £9.50 exc.vat  £11.40 inc.vat  

Enables the Oregon Action Cam ATC2K/3K to be fastened to a standard tripod or any of our mounts that use the 1/4" fixing screw.

Buy online from www.cameragrip.co.uk


Buy online from www.cameragrip.co.uk
 

 

RETURN TO MAIN MENU

 

HOW TO ORDER


You can purchase online from
www.cameragrip.co.uk 
We do not have an on-line ordering service on this site.. 
Orders can be made by phone on  +44 (0)115 9599028
or by e-mail  sales@b-hague.co.uk 
or by post to B. Hague & Co. Ltd. Unit E2 Trent Park Trading Estate,
Little Tennis Street South, Nottingham, England. NG2 4EU 
 


TO ORDER
We will require your name and address, name of product and product code.
If payment is by credit card, we will need name and address of card holder, card number, expiry date & security code ( this is the last set of numbers/digits on the other side of the card next to the signature ) plus issue number on switch cards. Orders by credit card can only be dispatched to the card holder's address.

PAYMENT - We accept VISA,  MASTERCARD, DELTA, SWITCH & CONNECT CARDS, or CHEQUES in Sterling. ( WE DO NOT ACCEPT AMERICAN EXPRESS )  

SHIPPING COSTS to the UK, Europe & the rest of the world will automatically be calculated if purchased online from  www.cameragrip.co.uk 
or e-mail
sales@b-hague.co.uk  for a quotation.
 

  

 B. Hague & Co. Ltd.
 Unit E2 Trent Park Trading Estate
 Little Tennis Street South
 Nottingham
 NG2 4EU

 Phone:  +44 (0)115 959 9028    
 E-mail: 
info@b-hague.co.uk

 
Hours of business

 Monday - Friday 8.00am. - 5.00pm.

 All our products are on display in our showroom.
 ( Viewing by appointment only - no children )
 Demonstrations -
A chance to see and try before you buy!
 

Sept 2013

RETURN TO MAIN MENU