Hague Multi-Jib K12

Hague Multi-Jib K12

Picture shows Multi-Jib at standard length on Manfrotto 351 legs & Hague D4 dolly.

* Choice of three jib lengths

* Quick and simple to set up

* Radial ball bearings ensure
super smooth crane movement

* Fits to a Pro 100/75mm "bowl type" Tripod
or a Hague Dolly.

* The camcorder can move smoothly from ground level
to almost 4 metres high & pans 360 degrees.

Multi-Jib
Product code K12 £625.00 exc.vat £750.00 inc.vat

Suitable for all Camcorders!

The Multi-Jib fastens to any pro-tripod with a 100 or 75mm. bowl or a Hague dolly. It is quick and simple to set up and can be used at three different lengths. At it's standard or short length it will support up to 14kg. and at it's longest length will support up to 9kg.. A 100mm. bowl enables you to fasten your video head from your tripod onto the jib, (an optional Stepper Ring is available if you are on the 75mm. bowl system) or a pan & tilt power head can be used for remote operation. Radial ball bearings ensure super smooth crane movement from ground level to almost 4 metres high and pan 360 degrees. Drag can be added to hold the arm at a set position. Standard bar weights can be used as counterbalance or we can supply weights or sand bags as optional extras.

Picture shows Multi-Jib at its longest length
on Manfrotto 351 legs & Hague D4 dolly.

	The Multi-Jib breaks down to just 1.2 metres in length making it very easy to handle and will fit in any vehicle. It is suitable for all handheld camcorders, pro-camcorders and will support a maximum weight of 14kg. An optional video head , or remote pan & tilt power head can be fitted to the jib, a LCD monitor bracket is also available making it easier to monitor your shots. Supplied in a cardboard carton. Price excludes - tripod, dolly, video head, power head, camera, weights and bag
Picture shows Multi-Jib at it's shortest length on Manfrotto 525legs & Hague D4 dolly.	The table below shows the various configurations the jib can be used in.	Picture shows optional Underslung Pan & Tilt Power Head

LENGTH	MODE	PAN RADIUS	TOTAL LENGTH	CRANE MOVEMENT	MAXIMUM WEIGHT
SHORT	B	112cm / 44"	186cm / 73"	130cm / 51"	14kg.
SHORT	C	107cm / 42"	186cm / 73"	120cm / 47"	14kg.
STANDARD	B	175cm / 69"	285cm / 112"	254cm / 100"	12kg.
STANDARD	A	152cm / 60"	285cm / 112"	196cm / 77"	14kg.
LONG	A	262cm / 103"	396cm / 155"	396cm / 155"	9kg.

LENGTH - Short is using a single section of the jib. Standard is using two sections and Long is using all three sections.
MODE - There are three pivot positions the jib can be assembled in.
PAN RADIUS - This is the distance from the tripod to camera when the jib is in a horizontal position.
TOTAL LENGTH - This is the length from the weights to camera when the jib is in a horizontal position.
CRANE MOVEMENT - This is the maximum up & down movement, from its lowest position to its highest.
MAXIMUM WEIGHT - This is the maximum combined weight of camera and video head the jib will support.

Carton Size 130cm x 20cm x 20cm. - Weight 18kg.
Fastens to a 100 or75mm "Bowl Type" tripod or the following Hague Dollies D2, D3 or D7.

Optional Accessories

	HAGUE JIB & CRANE DOLLY D3 Product code D3 £196.00 exc.vat £235.20 inc.vat *Ideal for Hague Jibs & Cranes K12, K14 & K16DV* The Hague Dolly D3 has been designed for use with the Hague range of jibs K12, K14 & K16DV. The three leg frame fastens to the dolly with a handwheels, making it quick and simple to set up. The large 100mm individually braked swivel wheels enable the dolly to be moved with ease. The aluminium dolly folds for easy transportation. Suitable for Hague Jibs K12,K14,K16DV - Height 110cm. – Weight 8kg. Price includes:- Dolly with 100mm dia. Swivel Wheels, Three leg stand.
	1 x 5kg. COUNTERBALANCE WEIGHT *Product code* K8W *£13.00 exc.vat £15.60 inc.vat* 4 x 5kg. COUNTERBALANCE WEIGHTS (20kg) *Product code* *SBW* *£43.00 exc.vat £51.60 inc.vat* The Hague range of Jibs, Cranes and Booms are not supplied with weights. These can be purchased individually or as a set of 4. Each weight is 5kg., the amount required will vary depending on the weight of camera and the length the jib is set at. The K8 usually requires 1 or 2 weights, the others may need up to 20kg.
	PADDED TRANSIT BAG *Product code CT46 £60.00 exc.vat £72.00 inc.vat* Suitable for Hague Jibs, Cranes, Booms K8, K10, K12 & D3 Jib & Crane Dolly The rigid padded transit bag has a heavy duty zip which runs along three sides of the bag, this enables the top of the bag to be lifted for easy access. Inside the bag is a unique pull-over protective fabric insert to securely wrap equipment within the case. There are internal tie-down straps to make sure equipment stays in place, end handles for easy carrying and a transport ID tag. Specifications: Internal Dimensions (W x D x H): 46 x 8 x 7.75 in. (116 x 20 x 19cm) External Dimensions (W x D x H): 48 x 9.5 x 9 in. (122 x 24 x 22.5cm) Colour: Black
	PADDED TRANSIT BAG *Product code CT49 £92.00 exc.vat £110.40 inc.vat* Suitable for Hague Jibs, Cranes, Booms K10, K12 & D3 Jib & Crane Dolly The rigid padded transit bag has a heavy duty zip which runs along three sides of the bag, this enables the top of the bag to be lifted for easy access. The interior features a reinforced support spine and end panels, pull-over protective fabric and tie-down straps, Exterior abrasion runners and heavy-duty bearing wheels provide smooth transport with ultimate protection. The grip handles offer easy carrying comfort. Approximate Size;- 124 x 23 x 18cm. 49" x 9" x 7" Colour;- Black
	MONITORS, MONITOR BRACKETS, and CAMERA CONTROL Please check out our range of Monitors and Monitor Brackets plus our range of Remote Camera Controls
	REMOTE PAN and TILT POWER HEADS Remote Pan & Tilt Power Head. ( more details ) Remote Underslung Pan & Tilt Power Head. ( more details )
	STEPPER RING *Product code SR £19.00 exc.vat £22.80 inc.vat* The Stepper Ring enables a video head with a 75mm. half ball to be used on a 100mm bowl.

RETURN TO JIBS, CRANES and BOOMS

RETURN TO MAIN MENU

HOW TO ORDER

You can purchase online from www.cameragrip.co.uk
We do not have an on-line ordering service on this site..
Orders can be made by phone on +44 (0)115 9599028
or by e-mail sales@b-hague.co.uk
or by post to B.Hague & Co. Ltd. Unit E2 Trent Park Trading Estate,
Little Tennis Street South, Nottingham, England. NG2 4EU

TO ORDER We will require your name and address, name of product and product code.
If payment is by credit card, we will need name and address of card holder, card number, expiry date & security code ( this is the last set of numbers/digits on the other side of the card next to the signature ) plus issue number on switch cards. Orders by credit card can only be dispatched to the card holder's address.

PAYMENT - We accept VISA, MASTERCARD, DELTA, SWITCH & CONNECT CARDS, or CHEQUES in Sterling. ( WE DO NOT ACCEPT AMERICAN EXPRESS )

SHIPPING COSTS to the UK, Europe & the rest of the world will automatically be calculated if purchased online from www.cameragrip.co.uk
or e-mail sales@b-hague.co.uk for a quotation.

B.Hague & Co. Ltd.
Unit E2 Trent Park Trading Estate
Little Tennis Street South
Nottingham
NG2 4EUB

Phone: +44 (0)115 959 9028
E-mail: info@b-hague.co.uk

Hours of business

Monday - Friday 8.00am. - 5.00pm.

All our products are on display in our showroom.
( Viewing by appointment only - no children )
Demonstrations - A chance to see and try before you buy!

Jan 2012

RETURN TO MAIN MENU