Hague Multi-Mount System

Hague Multi-Mount System
MMS

HAGUE MULTI-MOUNT SYSTEM

The Multi-Mount System enables a variety of interchangeable components from Hague and Manfrotto to be used in various ways to mount a camera in difficult positions, such as on vehicles, roll bars, scaffolding towers, railings, windows etc. The systems have a 100mm Bowl Mount or a Head Mount, these are held in position by using Connecting Rods, Angle Brackets, Double Ball Brackets, Rod Clamps, Connecting Collars, Superclamps and Suction Pads.
The Multi-Mount System is available as 3 different kits or all the parts are available as separate items. All the components have either a 5/8" / 16mm socket or stud and are joined together with Connecting Rods of various lengths, which can be joined together to form a ridged platform to mount the camera on.

HAGUE MULTI-MOUNT SYSTEM KIT 1
Product Code MMS1 £556.00 exc.vat. £667.20 inc.vat.

The Hague Multi-Mount System Kit 1 consists of :-
Rod Clamp - RC x 2. Connecting Rods R1000 x 3. R500 x 3. R250 x 3. R125 x 2. Connecting Collar - CC x 2. Connecting Stud - SCS x 3. Suction Mount - 241 x 3. 100mm Bowl Mount - BM100 x 1. Stepper Ring - SR x 1. Superclamp - SC x 3. Angle Bracket - AB58 x 6

HAGUE MULTI-MOUNT SYSTEM KIT 2
Product Code MMS2 £351.00 exc.vat. £421.20 inc.vat.

The Hague Multi-Mount System Kit 2 consists of :-
Rod Clamp - RC x 1. Connecting Rods R1000 x 1. R500 x 2. R250 x 2. R125 x 2. Connecting Collar - CC x 1. Connecting Stud - SCS x 3. 100mm Bowl Mount - BM100 x 1. Stepper Ring - SR x 1. Superclamp - SC x 3. Angle Bracket - AB58 x 6

HAGUE MULTI-MOUNT SYSTEM KIT 3
Product Code MMS3 £304.00 exc.vat. £364.80 inc.vat.

The Hague Multi-Mount System Kit 3 consists of :-
Rod Clamp - RC x 1. Connecting Rods R1000 x 1. R500 x 2. R250 x 2. R125 x 1. Connecting Collar - CC x 1. Connecting Stud - SCS x 3. Head Mount - HM38 x 1. Superclamp - SC x 3. Angle Bracket - AB58 x 6

All the Multi-Mount System components can be purchased separately

HAGUE MULTI-MOUNT SYSTEM
Component parts

	ROD CLAMP Product code RC £21.00 exc.vat £25.20 inc.vat Rod Clamp, Product Code RC The Rod Clamp enables two connecting rods to be held together to either adjust the length of the two rods or change direction or to brace across the rods.
	CONNECTING RODS Product code *R1000 £17.00 exc.vat £2.40 inc.vat* Product code *R500 £14.00 exc.vat £16.80 inc.vat* Product code *R250 £13.00 exc.vat £15.60 inc.vat* Product code *R125 £11.00 exc.vat £13.20 inc.vat* Connecting Rods Product Code R1000, R500, R250 or R125 The Connecting Rods are available at 4 different lengths from 125mm, 250mm, 500mm and 1000mm.
	CONNECTING COLLAR Product code CC £11.00 exc.vat £13.20 inc.vat The Connecting Collar enables two 5/8" / 16mm male studs to be held together, such as holding two connecting rods together.
	CONNECTING STUD Product code SCS £11.00 exc.vat £13.20 inc.vat The Connecting Stud enables the Angle Bracket to be fastened to a Superclamp, or it can be used to join two Superclamps together.
	SUCTION MOUNT 241 Product code 241 £55.00 exc.vat £66.00 inc.vat The Suction Mount has a ball leveller with a 5/8" / 16mm female socket that holds the Connecting Rods.
	HEAD MOUNT Product code HM38 £42.50 exc.vat £51.00 inc.vat The Head Mount is a triangle plate with a 3/8" threaded stud to attach a Ball Levelling Head, Pan & Tilt Head or a Quick Release Adapter ( sold separately ). At the corners of the triangle plate are 5/8" / 16mm male studs to attach the Angle Bracket.
	100mm BOWL MOUNT Product code BM100 £68.00 exc.vat £81.60 inc.vat The 100mm Bowl Mount enables a Pro-Pan & Tilt Head with a 100mm claw ball ( sold separately ) to be fastened to the mount and has the facility to "level off" the head. At the corners of the triangle plate are 5/8" / 16mm male studs to attach the Angle Bracket.
	STEPPER RING Product code SR £19.00 exc.vat £22.80 inc.vat Stepper Ring, Product Code SR The Stepper Ring enables a Pan & Tilt Head with a 75mm levelling system to be used on the 100mm Bowl Mount.
	SUPERCLAMP Product code SC £20.00 exc.vat £24.00 inc.vat The Superclamp can be attached to any pole, tube, bench or table. Its jaws will attach to a pole between 12 to 55mm in width or table edge between 12 to 30mm. It can be fixed either vertically or horizontally and has a 16mm / 5/8" female socket.
	ANGLE BRACKET Product code AB58 £21.00 exc.vat £25.20 inc.vat The Angle Bracket has two 5/8" 16mm female sockets with locking handle. It is used to connect the rods to the triangle mount.

HAGUE MULTI-MOUNT SYSTEM
Compatible parts that can also be used

	VARIABLE FRICTION / MAGIC ARM *Product code* *MA £81.50 exc.vat £97.80 inc.vat* The magic arm extends up to 53cm. away from the fixing point and is fully adjustable in all directions, with a single handwheel for locking it in position. Has a 16mm / 5/8" spindle. Includes reversible camera plate.
	DOUBLE BALL TILT HEAD *Product code* *DB £31.50 exc.vat £37.80 inc.vat* The Double Ball Tilt Head can be set at any angle or direction with a single lever for locking. Has a 16mm / 5/8" spindle. Includes reversible camera plate.
	WALL BRACKET Product code *WB £16.50 exc.vat £19.80 inc.vat* Wall bracket with 16mm. / 5/8" socket and locking screw. Wall plate diameter 90mm.

RETURN TO MOUNTING BRACKETS & CLAMPS

RETURN TO MAIN MENU

HOW TO ORDER

You can purchase online from www.cameragrip.co.uk
We do not have an on-line ordering service on this site..
Orders can be made by phone on +44 (0)115 987 0031
or by Fax on +44 (0)115 987 2900
or by e-mail sales@b-hague.co.uk
or by post to B. Hague & Co. Ltd. Mile End Road, Colwick, Nottingham, England. NG4. 2DW

TO ORDER We will require your name and address, name of product and product code.
If payment is by credit card, we will need name and address of card holder, card number, expiry date & security code ( this is the last set of numbers/digits on the other side of the card next to the signature ) plus issue number on switch cards. Orders by credit card can only be dispatched to the card holder's address.

PAYMENT - We accept VISA, MASTERCARD, DELTA, SWITCH & CONNECT CARDS, or CHEQUES in Sterling. ( WE DO NOT ACCEPT AMERICAN EXPRESS )
CARRIAGE COSTS in the UK – £12.95, £7.95 or £2.95 Depending on size, weight or value.

SHIPPING COSTS to Europe & the rest of the world will automatically be calculated if purchased online from www.cameragrip.co.uk
or e-mail sales@b-hague.co.uk for a quotation.

B. Hague & Co. Ltd.
Mile End Road, Colwick,
Nottingham. NG4 2DW

Phone: +44 (0)115 987 0031
Fax: +44 (0)115 987 2900
E-mail: info@b-hague.co.uk

Hours of business

Monday - Friday 8.00am. - 5.00pm.

All our products are on display in our showroom.
( Viewing by appointment only )
Demonstrations - A chance to see and try before you buy!

January 2011

RETURN TO MAIN MENU