Hague Pro Cam-Slide
incorporating Igus Hybrid Bearings
PCS1000

Hague Pro Cam-Slide
A LINEAR CAMERA TRACKING SYSTEM
Product code PCS1000

Prices and more details at www.cameragrip.co.uk
IDEAL FOR HEAVIER CAMERAS, SUPPORTS UP TO 15kg.

The new Hague Pro Cam-Slide incorporates the latest Igus Hybrid Roller Bearings running on an Igus WS-16-60 Linear Rail. It is this combination, of roller within the sleeve, that creates easy smooth camera movements far superior to standard sleeve bearings used by other suppliers.

The Pro Cam-Slide is quick and simple to set up, it can be mounted to any sturdy tripod or placed on a table, or on the floor for low shots. The carriage is supplied with both 1/4” and 3/8” threaded screws to attach a video head or ball head to the carriage, or you can attach your camera directly to the carriage.

Once the camera is mounted to the carriage you can create super smooth tracking shots as you slide the carriage down the rail. On the side of the carriage is a carriage lock which will hold it in a set position, or the lock can be used to add drag to the carriage if required.

The rail is 1metre long and can be supported in various ways, there are 3/8” and 1/4” threaded mounting holes in the centre and at each end. The track can be mounted directly to a tripod or across two tripods.  
Two rail supports are also supplied, one for each end of the rail, these support the Pro Cam-Slide when it is used on a table or the floor, and they also prevent the carriage from coming off the end of the rail. The rail supports have 4 self aligning adjustable feet which are ideal when the Cam-Slide is used on uneven ground.

Pro Cam-Slide Kit PCS1000 includes: - 1000mm Rail, Two rail supports, Carriage with lock, plus 3/8” and 1/4” Screws.

THE CARRIAGE is manufactured by Hague using the new Igus DryLin® W Hybrid Roller Bearings, these bearings have a roller bearing incorporated in the housing, plus a sleeve and require no lubrication. It’s this combination that makes the carriage much easier to slide on the rail. On the side of the carriage is a lock which can also be used to add drag when required. On top of the carriage is a mounting plate to attach a video or ball head, or the camera could be fastened directly to this plate. Both 1/4” and 3/8” screws are supplied with the carriage.
Size L115 x W90 x H40mm.
If you are already using the Igus 16-60 Rail you can easily upgrade to the new Hague Pro Carriage, as it can be purchased separately.

THE RAIL is the Igus DryLin® WS 16-60 Double Rail which has been adapted by Hague for video use, adding three sets of mounting holes to accept either 1/4” or 3/8” mounting screws for mounting to a video head or tripod legs.
The double rail track is made from hard anodized aluminium.
Rail size 16mm. Rail width 60mm. Rail length 1000mm. 
 

THE RAIL SUPPORTS are manufactured by Hague; they have 4 self aligning adjustable feet and are fastened to the rail at each end by a single hand nut.
Size L250 x W40 x H50 to 120mm.

 

 

 


Recommended accessories for the Hague Pro Cam-Slide
 

     

Manfrotto 494RC2 Ball Levelling Head with Quick-Release Camera Plate
Product code 494RC2 
Prices and more details at www.cameragrip.co.uk 

Suitable for Photo or Video Cameras. Supports up to 4kg.
Size:- Height 8.5cm. Camera plate size 50 x 35 x 9mm.   Weight 0.32kg.
Quick Release Camera Plate 200PL-14 with standard 1/4" camera screw. 
3/8" threaded hole in the base with reducer ring for 1/4"
Designed for use with camcorders and digital cameras. The strong die-cast construction, precision-machined aluminium housing and ball provide excellent smooth movements across all tilt positions. Independent pan and tilt locks for both the +90°-90° ball and the 360° pan movements. Head to tripod attachment is 3/8” female. Fitted with a quick release 200PL camera plate system with a secondary safety catch. Colour - Black

     

Manfrotto 701HDV Pro Fluid Mini Video Head
Product code701HDV  Price and more details at www.cameragrip.co.uk
701HDV (Head only)

Developed specifically to support the latest prosumer and professional light compact HD camcorders, the 701HDV offers an updated design, which has been created for improved ergonomics with locks and knobs that allow for a more solid grip and better control, a better fluidity thanks to improved internal fluid cartridges, a double pan-bar rosette and a bigger sliding plate to optimize the position of the camera considering its centre of gravity.    Independent pan and tilt locks.  Pan and Tilt drag - fluid cartridge with fixed drag.  Counterbalance – yes.   Balance control - one fix spring for 1.5Kg camera weight.   Quick release – yes.   Camera plate type - 501PL  with  1/4'' and 3/8'' screws.  Head attachment (bottom) - 3/8'' female thread.  Single pan bar.   2 pan bar positions.  Bubble spirit level.
Supports up to 4kg. Height 9.5cm. Weight 0.8kg. Camera plate 501PL  

     


The Hague Pro Cam-Slide can also be purchased as individual items
 

Hague Pro Cam-Slide Carriage
Product code PCSC 
Prices and more details at www.cameragrip.co.uk

If you are already using an Igus WS-16-60 Rail or Glidetrack HD you can easily upgrade to the new Hague Pro Cam-Slide Carriage. The carriage is manufactured by Hague using the new Igus DryLin® W Hybrid Roller Bearings, these bearings have a roller bearing incorporated in the housing, plus a sleeve and require no lubrication. It’s this combination that makes the carriage much easier to slide on the rail. On the side of the carriage is a lock which can also be used to add drag when required. On top of the carriage is a mounting plate to attach a video or ball head, or the camera could be fastened directly to this plate. Both 1/4” and 3/8” screws are supplied with the carriage. Size L115 x W90 x H40mm.

   
Igus 16.60 Rail adapted by Hague
Product code PCSR
Prices and more details at www.cameragrip.co.uk

The Rail is the Igus DryLin® WS 16-60 Double Rail which has been adapted by Hague for video use, adding three sets of mounting holes to accept either 1/4” or 3/8” mounting screws for mounting to a video head or tripod legs.
The double rail track is made from hard anodized aluminium.
Rail size 16mm. Rail width 60mm. Rail length 1000mm. 

   
Hague Rail Supports
Product code PCSS 

Prices and more details at www.cameragrip.co.uk

The Rail Supports are manufactured by Hague; they have 4 self aligning adjustable feet and are fastened to the rail at each end by a single hand nut. Size L250 x W40 x H50 to 120mm. Only suitable for the Igus DryLin® WS-16-60 or WS-10-40 Double Rail and if the rail length has been cut with a hole 20mm from the end.

 

 
Hague 5/8" Cam-Slide Collar
Product code 58C
Prices and more details at www.cameragrip.co.uk

The 5/8" Cam-Slide Collar enables a light stand to be used to support the track of the Cam-Slide. The collar is supplied with a screw to fasten it to the track, the 5/8" - 16mm. socket can then be used to attach the track to a lighting stand or any device with a 5/8" stud. When used with a DB double ball bracket and SC superclamp, the Cam-Slide could be attached to a table edge or rail making it a very versatile tracking system when there may not be room to mount it on a tripod.

   

 

Buy online from www.cameragrip.co.uk

RETURN TO SLIDER SYSTEMS

RETURN TO MAIN MENU

 

HOW TO ORDER


You can purchase online from
www.cameragrip.co.uk 
We do not have an on-line ordering service on this site.. 
Orders can be made by phone on  +44 (0)115 9599028
or by e-mail  sales@b-hague.co.uk 
or by post to B.Hague & Co. Ltd. Unit E2 Trent Park Trading Estate,
Little Tennis Street South, Nottingham, England. NG2 4EU 
 


TO ORDER
We will require your name and address, name of product and product code.
If payment is by credit card, we will need name and address of card holder, card number, expiry date & security code ( this is the last set of numbers/digits on the other side of the card next to the signature ) plus issue number on switch cards. Orders by credit card can only be dispatched to the card holder's address.

PAYMENT - We accept VISA,  MASTERCARD, DELTA, SWITCH & CONNECT CARDS, or CHEQUES in Sterling. ( WE DO NOT ACCEPT AMERICAN EXPRESS )  

SHIPPING COSTS to the UK, Europe & the rest of the world will automatically be calculated if purchased online from  www.cameragrip.co.uk 
or e-mail
sales@b-hague.co.uk  for a quotation.
 

  

 B.Hague & Co. Ltd.
 Unit E2 Trent Park Trading Estate
 Little Tennis Street South
 Nottingham
 NG2 4EUB

 Phone:  +44 (0)115 959 9028    
 E-mail: 
info@b-hague.co.uk

 
Hours of business

 Monday - Friday 8.00am. - 5.00pm.

 All our products are on display in our showroom.
 ( Viewing by appointment only - no children )
 Demonstrations -
A chance to see and try before you buy!
 

Feb 2012

RETURN TO MAIN MENU