Remote Pan & Tilt Power Heads
Wired remote control - Smooth camera movement - Variable speed
from HAGUE and VARIZOOM

 PAN & TILT POWER HEAD

Pan & Tilt Power Head 
PH   £110.64 exc.vat  £130.00 inc.vat 

* Variable speed, 
* Battery operated, 
* Supports up to 2.7kg. 
* Cable remote control with 20ft. extension cable, 
* Auto pan mode

 MODIFIED PAN & TILT POWER HEAD

Modified Power Head 
MPH   £127.66 exc.vat  £150.00 inc.vat 
* Pans 360 degrees
* Variable speed, 
* Battery operated, 
* Supports up to 2.7kg. 
* Cable remote control with 20ft. extension cable, 

This is the same power head as above (PH), but has been modified to pan 360 degrees.

SEE SPECIFICATIONS BELOW

Tilt Head 
PH234   £14.47 exc.vat  £17.00 inc.vat
Can be used on top of the PH or MPH
to change the angle of the camera

Clarke Mast Adaptor 
CMA   £21.23 exc.vat  £24.95 inc.vat
Fastens the PH & MPH Pan & Tilt Power Heads to a Clarke Pneumatic Mast. Stud size dia. 24mm x 95mm with a ¼” screw to secure the Power Head.
(Check that the bore size of the mast is 24-25mm)

Tilt Head 
PH234RC   £22.98 exc.vat  £27.00 inc.vat
Can be used on top of the PH or MPH
to change the angle of the camera.
With quick release camera plate system and secondary safety lock.  

Power Head Stand
Product code PHS   £42.51 exc.vat  £49.95 inc.vat 
The Pan and Tilt Power Head fastens directly onto the sturdy stand. It has an adjustable telescopic column with a minimum height of 110cm and a maximum height of 188cm. The column can be locked at the required height and there is a safety pin to prevent the column slipping. It is ideal for stage shows, conferences, weddings etc.
(See picture right)
The stand is made from lightweight aluminium.
Transit size 106 x 12 x 12cm. Weight 3.5kg. Colour Black.

 USB PAN TILT CONTROLLER

USB Pan Tilt Controller 
USB   £59.53 exc.vat  £69.95 inc.vat 
Includes software (Windows only).

Ideal for Remote Photography
Suitable for Hague Power Heads PH, MPH & UPH

This USB controller allows the pan and tilt power head to be controlled from the USB port of a computer. This is particularly useful if you are using a camera with a USB connection.

The picture top left shows the controller, and the picture on the right shows how it looks on your computer once installed.

The photo shows the camera and the USB PanTilt Controller connected to a four port USB extender hub (not supplied).
The blue cable is ordinary Cat 5 ethernet cable (not supplied) and goes to the other half of the USB extender which can be up to 50m away. The USB extender is plugged into a single USB port on the computer.

The controller allows you to pan or tilt the power head in either direction, or if the corner controls are activated the head will pan and tilt at the same time. There is also a speed control that switches the head from slow to fast (see the specifications below for max and min speed).
Cable length from USB plug to power head plug 500mm.

Picture left shows the USB Pan Tilt Controller in use.
The price shown is for the controller and software only, no other cables or items in the picture are supplied.

30M Cat 6 Cable

USB Extender & 30M Cat 6 Cable
USB30   £55.28 exc.vat  £64.95 inc.vat 

Ideal for Remote Photography
Suitable for Hague Power Heads PH, MPH & UPH

This USB Extender and cable enables you to use the USB Pan Tilt controller up to 30m from your computer.

USB EXTENDER - Connector type A:RJ45 Female - Connector type B:1 x USB A Male and 1 x USB A Female - Length, lead:45cm  - Cable type: USB Extender - Colour: Silver - Length / Height, external: 25mm

CAT 6 30M PATCH LEAD - GREY - Colour: Grey - Connector type A:RJ45 - Connector type B:RJ45 - Length 30m - Cable type: CAT 6 RJ45 Patch Cable

 UNDERSLUNG PAN & TILT POWER HEAD

* Variable speed, 
* Battery operated, 
* Supports up to 2.5kg. 
* Cable remote control with 6.1m. (20ft.)
   extension cable, 

This electronic motorized Underslung Pan & Tilt Power Head is suitable for all handheld camcorders that weigh less than 2.5kg. 

Remote Pan & Tilt Power Head 
MC100   £1995.00 exc.vat  £2344.13 inc.vat 

Motion Control System
For All Camcorders
Such as the Canon XL-1S, XM1/2 and Sony VX2100, VX2000,
PD150/170, PDX10, DSR250, JVC DV-5000, Sony DSR-300 and more!

VariZoom has created a lightweight and extremely portable remote head, weighing only 4kg., it supports camcorders up to 9kg. 
VariZoom has compacted all of the electronics necessary to drive the precision pan and tilt head into one small control housing, allowing for portability and versatility! Just mount the VZ-MC remote head on a tripod, jib, or mount it to a wall! (you can undersling it as well); plug into the supplied cord leading to the control handle: power up your control handle by battery or with the supplied ac/dc power supply and you’re ready to go!  
Increase your rates/profits as well as your production values.  Beautifully machined parts with the highest standards of industrial grade electronic components, VariZoom’s machining electronics and quality control are second to none! 

The VZ-MC100 Kit includes:-

• Remote Pan & Tilt Head
• Pan & Tilt Control Grip/Box
• Locking 4-pin XLR Power Supply
• 20 feet of Pan & Tilt Motor Cord w/ locking connector
• Heavy Duty Hard Carrying Case w/ Customized Interior Padding  

Remote Camcorder Control - MORE DETAILS

RETURN TO MAIN MENU

HOW TO ORDER

You can purchase the majority of our products online from www.cameragrip.co.uk
 We do not have an on-line ordering service on this site.. 
Orders can be made by phone on  +44 (0)115 987 0031 
or by Fax on +44 (0)115 987 2900 
or by e-mail  sales@b-hague.co.uk 
or by post to B. Hague & Co. Ltd. Mile End Road, Colwick, Nottingham, England. NG4. 2DW 

TO ORDER  We will require your name and address, name of product and product code.
If payment is by credit card, we will need name and address of card holder, card number, expiry date & security code ( this is the last set of numbers/digits on the other side of the card next to the signature ) plus issue number on switch cards. Orders by credit card can only be dispatched to the card holder's address.

PAYMENT - We accept VISA,  MASTERCARD, DELTA, SWITCH & CONNECT CARDS, or CHEQUES in Sterling. ( WE DO NOT ACCEPT AMERICAN EXPRESS )

CARRIAGE COSTS in the UK – add £ 7.95, (UK Mainland Only).  

 B. Hague & Co. Ltd.
 Mile End Road, Colwick, 
 Nottingham. NG4 2DW

 Phone:  +44 (0)115 987 0031    
 Fax:  +44 (0)115 987 2900    
 E-mail:  info@b-hague.co.uk

 Monday - Thursday 8.00am. - 5.00pm.
 Friday 8.00am. - 1.00pm.

 All our products are on display in our showroom. 
 ( Viewing by appointment )
 Demonstrations - A chance to see and try before you buy!
  

RETURN TO MAIN MENU