Telescopic Camera Stand with
Remote Pan & Tilt Power Head
& Inspire LiveView Remote Control

Telescopic Camera Stand with
Remote Pan & Tilt Power Head and a Inspire LiveView Remote Control
Product Code AMPC for Canon   £605.00 exc.vat  £726.00 inc.vat
Product Code AMPN for Nikon   £605.00 exc.vat  £726.00 inc.vat

Outdoor: As compared with the traditional view, the result is completely different and the image is greatly improved when taken from a higher view point.
It is recommended that you use guide ropes (not supplied) when used outside in windy conditions to stabilize the stand and prevent swaying.

Indoor: Sometimes you may have to take a picture of a detail that is in an awkward position; it may be too high with bad lighting conditions. The traditional tripod is not high enough and, in some places, heavy duty scaffolding is forbidden.

Remote Pan & Tilt Power Head 
The electronic motorized Pan & Tilt Power Head fastens to the stand by an adaptor with a 1/4" stud.
The unit is battery operated with a wired remote control for both pan & tilt, it also has a variable speed control. It can to pan 340 degrees and tilt up or down 15 degrees. We also supply a tilt correction plate which will allow the camera to tilt down 30 degrees from a level position, which is useful when the stand is being used for high shots.
The pan speed is variable between 4 to 8 degrees per second and the tilt is variable between 1.2 to 2.4 degrees per second ( speeds are approximate ). The Power Head is powered by 4 AA batteries. Size 145x115x103mm (5.75x4.5x4 inches)