Our range
Video
Accessories include
Memory Cards
- Small Shoe Adaptors - Connecting Cables etc.
|
|
Our range
Video
Accessories include |
|
|
|
 |
Follow Focus/Zoom Lever |
 |
 |
HOODMAN CAMCORDER SCREEN SHADE Product Code HD300 The Hoodman camcorder screen shade enables you to monitor your shots even in bright sunlight. It simply fastens round the camcorder's screen with elastic straps secured by Velcro. The HD-300 VIDEO hood works well for all camcorders with a 2.5 inch to 3 inch 16x9 HD LCD screen. |
 |
 |
HOODMAN CAMCORDER SCREEN SHADE Product Code H400
Hoodman Camcorder LCD Screen hoods are made of
sturdy plastic inserts, wrapped in water resistant nylon. The hoods fold
flat for quick and easy storage and simple elastic straps with velcro tabs
are used for mounting hoods to cameras. |
|
 |
HOODMAN HOODFINDER for XL1 & ENG CAMERAS Product Code HXL1
Hoodman Hoodfinder for XL1 & ENG Cameras |
|
 |
HOODMAN HOODCRANE for DSLR HD
VIDEO Product Code HCRN Price excludes Camera, Hoodloupe and HoodMag 3.0.
The HoodCrane is mounted on the camera's flash
hotshoe and attaches around the 'neck' of the HoodLoupe. A spring release
latch on the HoodCrane allows the Loupe to swing up and pivot out of the way
of the LCD screen and camera viewfinder whenever you wish to switch from
taking HD Video to using the camera's viewfinder, but then positions the
Loupe back to the exact same position on the screen. |
|
|
|
HOODMAN HOODCRANE CINEMA KIT for
DSLR HD VIDEO
This complete kit, called the Hoodman Cinema Kit
Pro (HCKP), includes the Hoodcrane, 3" Hoodloupe and the HoodMag 3.0.
|
|
 |
HAMA SECURE DIGITAL CARD 16GB
CLASS 10 Product Code 104367 Hama High Speed Gold SDHC 16 GB Class 10 Item Type: Secure Digital Card SecureDigital High Capacity Card (SDHC), complies with new SD 2.0 standard. Only suitable for terminal devices with SDHC slot, e.g. digital cameras, camcorders (not downward compatible with standard SD cards) Mechanical write protection (against inadvertent deleting), with label area for short notes. Speed class 10 (minimum write speed: 10 MB/s). Data transfer rate: reads at up to 22 MB/s, writes at up to 15 MB/s (depends on the system |
 |
 |
HAMA SECURE DIGITAL CARD 32GB
CLASS 10 Product Code 104368 Hama High Speed Gold SDHC 16 GB Class 10 Item Type: Secure Digital Card SecureDigital High Capacity Card (SDHC), complies with new SD 2.0 standard. Only suitable for terminal devices with SDHC slot, e.g. digital cameras, camcorders (not downward compatible with standard SD cards) Mechanical write protection (against inadvertent deleting), with label area for short notes. Speed class 10 (minimum write speed: 10 MB/s). Data transfer rate: reads at up to 22 MB/s, writes at up to 15 MB/s (depends on the system |
|
 |
Memory Card Wallet |
|
 |
HAMA CAMCORDER Digi LIGHT Product Code 6343 LED Lamp Magnum DigiLight - Fastens to the shoe of the camcorder - Better ambient light for video recordings - Better motif registration for photographing when it is dark - Constantly controlled luminosity - Colour temperature: white / 5500 Kelvin - Operating time: 2 hours - Power 2 x AAA batteries not included - Size 40 x 65 x 45mm. |
|
 |
SHOE BRACKET Product Code H6811 Some camcorders do not have an accessory shoe, so you are unable to attach lights, microphones, etc. The Shoe Bracket simply screws into the base of the camcorder and is adjustable sideways. There is also a 1/4" thread in the thumb screw so a tripod camera plate could also be attached. Made of plastic. Size 30 x 170 mm. |
 |
 |
MINI-CLAMP with BALL LEVELLING HEAD CLAMPS YOUR CAMERA, MONITOR etc. TO * Tables - up to 38mm. * Tubes & Pipes * Railings etc. The Mini-Clamp clamps to anything up to 38mm. in diameter, it can be mounted either vertically or horizontally and has a ball & socket tilt head onto which the camcorder is mounted.
Suitable
for Mini DV cams & all types of handheld Camcorders up to 1kg. |
 |
 |
SHOE MOUNT with BALL
LEVELLER Product code 492LCD The base fastens to the accessories shoe of the camcorder and is ideal for mounting a LCD monitor to the camcorder or a microphone or camera light if they have the standard 1/4" mount in the base. |
 |
 |
HOT SHOE MOUNT with BALL LEVELLER Product code HSM This handy ball leveller is ideal to fasten a monitor to the accessory shoe of the camcorder. For LCD monitors with a single 1/4" fixing hole in the base |
|
 |
HOT SHOE ADAPTOR The Hot Shoe Adaptor can be used in several ways. One way is to attach a
Short or Long Articulated Arm or other accessory with a 1/4" male screw to
it. Another way is to remove the top of it so that it has a male 1/4" male
screw to which you can attach any accessory with 1/4" female
threads, such as external sound devices etc. directly to it. |
|
 |
SHORT ARTICULATING ARM The Short Articulating Arm
is ideal when attached to the Mini Rod Clamp or the Hot Shoe Adaptor to
mount a monitor or other accessory to a tripod leg or the shoe of the
camera. If the Arm is attached to the Mini Rod Clamp it can be used to
fasten a small camera to cycle, pole, table edge, etc. |
|
 |
LONG ARTICULATING ARM The Long Articulating Arm
is ideal when attached to the Mini Rod Clamp or the Hot Shoe Adaptor to
mount a monitor, sound recorder or other accessory to a tripod leg or the
shoe of the camera. If the Arm is attached to the Mini Rod Clamp it can be
used to fasten a small camera to cycle, pole, table edge, etc. |
|
 |
MINI ROD CLAMP
The Mini Rod Clamp supports up to 2kg. It has
both 1/4" and 3/8" female screw holes, making it ideal when used with the Short
or Long Articulating Arm or a Manfrotto Mini or Small Hydrostat Arm. The
clamp will attach to tripod legs, poles, table edge etc. |
|
 |
MICROPHONE HANDGRIP Product code MH The Handgrip is ideal for handheld microphone use, it has a 1/4" stud with adaptors for stepping to 3/8" and 5/8" plus a shoe adaptor for microphones which would normally be attached to the camcorder's accessory shoe. Pictures - Left shows Microphone Handgrip with adaptors. Right shows with an optional microphone attached. |
 |
 |
Hama Hama Camera Spirit Level Hama
Camera Spirit Level with single bubble level and cover |
|
 |
SHOE ACCESSORY KIT Product Code SAK
|
|
 |
DOUBLE SHOE BRACKET Fits to the accessory shoe of the camcorder |
|
 |
TRIPLE SHOE BRACKET Fits to the accessory shoe of
the camcorder, enabling a microphone, light, radio mic etc. to be attached to the camera. |
|
 |
HAGUE SHOE ADAPTOR for
Canon HF100/10 Product Code CSA Only suitable for Canon HF100 and HF10 plus other new Canon camcorders with a small accessory shoe The HF100/10, along with some other new Canon camcorders, do not have a standard size accessory shoe so you are unable to attach other manufacturers microphones, lights etc. The Shoe Adaptor converts the small shoe on the camcorder to a standard sized one. It is raised by 20mm to clear the zoom control on some models making it easy to attach microphones, lights etc. |
 |
 |
DOUBLE SHOE ADAPTOR for Canon Product Code CDSA Only suitable for Canon camcorders with a small shoe and a 3.5mm mic input. The HF100/10, along with some other new Canon camcorders, do not have a standard size accessory shoe so you are unable to attach other manufacturers microphones, lights etc. The Shoe Adaptor converts the small shoe on the camcorder to two standard sized ones. |
|
|
|
SINGLE SHOE ADAPTOR
Product Code SSA Only suitable for Sony HC1/7 plus other Sony camcorders with a small accessory shoe The HC1/7, along with some other Sony camcorders, does not have a standard size accessory shoe so you are unable to attach other manufacturers microphones, lights etc. The Single Shoe Adaptor converts the shoe on the camcorder to a standard sized one. It is raised by 20mm to clear the shoe cap making it easy to attach microphones, lights etc. |
|
|
|
 |
DOUBLE SHOE ADAPTOR Product Code DSA Only suitable for Sony HC1/7 plus other Sony camcorders with a small accessory shoe The Double Shoe Adaptor converts the small Sony accessory shoe to a twin standard size shoe, enabling two accessories to be mounted at the same time. ie microphone and light. |
|
 |
HAGUE SINGLE SHOE RAISER Product Code HSR Ideal for Panasonic HDC HS,TM,SD 700 The Panasonic HS700, TM700 and SD700 all have a standard size accessory shoe, but it is in a recess which makes it difficult to attach some microphones and lights. The HSR Hague Shoe Raiser solves this problem as it raises the height by 26mm making it much easier to attach a microphone or a light. |
|
|
|
HAGUE DOUBLE SHOE ADAPTOR for Panasonic HS/TM/SD700 Product Code PDSA Ideal for Panasonic HDC HS,TM,SD 700 The Panasonic HS700, TM700 and SD700 all have a standard size accessory shoe, but it is in a recess which makes it difficult to attach some microphones and lights. The PDSA Double Shoe Adaptor solves this problem as it raises the height by 30mm and offers two accessory shoes to easily attach a microphone and light. |
|
 |
SHOE MOUNT with 1/4" STUD Shoe
Mount with 1/4" Stud and Locking Nut |
|
 |
SHOE STUD with LOCKING NUTS Shoe
Stud with 2 locking nuts x 1. |
|
 |
SHOE MOUNT Shoe
Mount x1. |
|
 |
CONVERSION BUSHES Product Code 5120
Set of 5 Conversion Bushes |
|
 |
CAMERA SCREWS Set
of 5 Spare Camera Screws |
|
|
|
CAMERA SCREWS Set
of 5 Spare Camera Screws |
|
 |
MANFROTTO CAMERA SCREWS Set
of 2 Spare Manfrotto Camera Screws |
|
|
|
MANFROTTO CAMERA SCREWS Set
of 2 Spare Manfrotto Camera Screws |
|
 |
WATERPROOF CLOTH GAFFER TAPE |
|
 |
WATERPROOF CLOTH GAFFER TAPE -
Multipack (4)
Multipack (1 Roll of Red, Blue, Yellow
& Black) |
|
| Connecting Cables - Couplers | ||
 |
HDMI Plug to Plug Lead Product Code HDMI HDMI specification compliant Length:- 1.5m. |
|
 |
HDMI Swivel Adaptor
Description |
|
|
|
3 Phono - 4 Pole 3.5mm Jack Plug Product Code 43090 3.5 Jack plug to
Phono plug x 3 Length 3m |
|
|
|
3 Phono - 3 Phono Product Code 43145
Phono plug x3
to
Phono plug x3 Length 5 |
|
|
|
Phono Coupler x 3 Product Code 43484 For connecting phono leads together, to create extensions. Female connections |
|
 |
Phono - BNC Adapter x 3 Product Code 43437
Phono to BNC |
|
|
|
XLR Microphone cable x 6m. long Product code RXLR-1 6 metre long - XLRF to XLRM microphone (Black) cable for Rode NTG-1, NTG-2 |
|
|
|
Short XLR Microphone cable x
300mm. long Product code RXLR-2 A short 500mm cable for camcorder mounting - XLRF to XLRM microphone (Black) cable for Rode NTG-1, NTG-2 |
|
|
|
Microphone cable XLR to 3.5
Stereo Plug x 6m. long Product code RXLR-3 5 metre long - XLRF to 3.5 stereo jack. Microphone cable for Rode NTG-2 Enables the Rode NTG2 or similar to be used on a camcorder with a 3.5mm stereo jack socket. |
|
|
|
Microphone cable XLR to 3.5
Stereo Plug x 2m. long Product code RXLR-4 2 metre long - XLRF to 3.5 stereo jack. Microphone cable for Rode NTG-2 Enables the Rode NTG2 or similar to be used on a camcorder with a 3.5mm stereo jack socket. |
|
 |
RODE Extension Cable Product code VC1 3m. Mike extension cable - 3.5mm Male plug - 3.5mm Female socket |
 |
 |
RODE XLR Converter Product code VXLR 3.5mm Stereo mini jack socket to XLR - enables the Rode Videomic to be used in a XLR input. |
|
 |
3.5mm Stereo jack Converter Product code MS35 Allows a 3.5mm mono jack plug to be used with a 3.5mm stereo jack socket - Ideal for mono microphones into stereo camcorders. |
|
|
HOW TO ORDER |
|
|
|
|
PAYMENT
- We accept VISA, MASTERCARD, DELTA, SWITCH & CONNECT CARDS, or CHEQUES in
Sterling. SHIPPING COSTS
to the UK, Europe & the rest of the world will automatically be calculated if
purchased online from
www.cameragrip.com |
|
B.Hague
& Co. Ltd. Little Tennis Street South Nottingham NG2 4EU Phone:
+44 (0)115 959 9028 |
Hours of business Monday -
All our products are on
display in our showroom. |
|
Nov 2014
